Amana dishwasher 10-3: other: drying fan error
10-3 means the control found a fault in the drying fan circuit, on models that have a drying fan.
What 10-3 means
- Brand
- Amana
- Appliance
- Dishwasher
- Code
- 10-3
- Documented meaning
- Other: drying fan error
- Applies to
- 6 Amana models on 1 platform
- Can you keep using it?
- Generally yes
What the dishwasher is detecting
The control runs a small fan during drying to move moist air out. An open fan motor, a loose connection or a failed fan drive circuit sets this code.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose connection in the fan circuit or an open fan motor.
- Documented A failed fan drive circuit on the control.
Safe checks you can make
- Switch off the dishwasher's circuit breaker (or unplug it, if it plugs in under the sink) for one minute, restore power and run a short cycle to see whether the code returns.
- Note whether the code comes back right after a power reset or only after some cycles; that detail helps the technician.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks the fan motor and every connection in its circuit with power off.
- Replaces the control only when the fan and wiring check good.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Dishwasher heating element or drying fan replacement | $190–$410 | Moderate |
| Dishwasher main control board replacement | $260–$590 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Generally safe to keep using. Washing is not affected; drying is weaker and moisture can build up around the door and keypad. Schedule service.
Amana models documented with this code
And 4 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Amana platforms:
Repair or replace?
A fault code alone rarely justifies replacing a dishwasher. Most 10-3 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 9–12-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need 10-3 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.