Crosley dryer F26: motor drive system failure
F26 (F-26) means the control detected a failure in the motor drive system, the circuit that turns the drum and blower.
What F26 means
- Brand
- Crosley
- Appliance
- Electric dryer, Gas dryer
- Code
- F26
- Documented meaning
- Motor drive system failure
- Applies to
- 11 Crosley models on 3 platforms
- Can you keep using it?
- No — stop and have it checked
What the dryer is detecting
The control checks that the drive motor starts and runs when commanded. If the motor circuit does not respond as expected, it flags F-26.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A drive motor that does not start or run.
- Possible A motor circuit or wiring fault, including the door switch in the motor circuit.
- Possible A broken drive belt or a seized drum or blower that stops the motor.
- Possible A motor relay fault on the main control.
Safe checks you can make
- Make sure the door closes fully and latches; a door that does not close properly prevents the drum from starting.
- Remove any item caught between the drum and the door opening.
- Turn the dryer off at the breaker (or unplug it) for about one minute, restore power and start a new cycle to see whether the code comes back right away.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the motor circuit test.
- Checks the belt, drum rollers and blower for binding.
- Checks the door switch and motor wiring.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Dryer drive motor or blower wheel replacement | $250–$550 | Heavy |
| Dryer drum belt replacement | $180–$320 | Light |
| Dryer door switch replacement | $180–$290 | Light |
| Dryer main control board replacement | $280–$640 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Stop using it until it is checked. Do not keep restarting the dryer. A motor that is stalled or struggling can overheat.
Crosley models documented with this code
And 1 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Crosley platforms:
Repair or replace?
A fault code alone rarely justifies replacing a dryer. Most F26 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 12–14-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F26 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.