Crosley dryer F6E2: communication error (control to interface)
F6E2 means communication between the main control and the user interface board has been lost, reported from the opposite side of the link from F6E1.
What F6E2 means
- Brand
- Crosley
- Appliance
- Electric dryer, Gas dryer
- Code
- F6E2
- Documented meaning
- Communication error (control to interface)
- Applies to
- 4 Crosley models on 2 platforms
- Can you keep using it?
- With caution
What the dryer is detecting
Both boards watch for valid messages from each other. F6E2 is the companion code to F6E1: on these platforms it records the failure in the other direction, so the checks are the same.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose or damaged connection between the main control and the user interface.
- Documented Loss of the low-voltage supply between the boards.
- Documented A failed user interface board.
- Documented A failed main control.
Safe checks you can make
- Turn the dryer off at the breaker (or unplug it) for about one minute, restore power and start a new cycle to see whether the code comes back right away.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Confirms that both the main control and the user interface are receiving power.
- Inspects the connection between the main control and the user interface for loose, corroded or pinched wiring.
- Uses the service diagnostics to isolate whether the interface board or the main control is not communicating.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Dryer user interface / keypad replacement | $230–$510 | Light |
| Dryer main control board replacement | $280–$640 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. If it clears after a reset and does not return, the dryer can be used. Repeated F6E2 codes mean the link between the boards needs diagnosis.
Crosley models documented with this code
Related problems and codes
Other codes documented on the same Crosley platforms:
Repair or replace?
A fault code alone rarely justifies replacing a dryer. Most F6E2 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 12–14-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F6E2 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.