KitchenAid wall oven F6E2: communication failure between oven power boards
F6E2 means the second oven's power board (ACU 2) is powered but is not receiving communication from the main power board.
What F6E2 means
- Brand
- KitchenAid
- Appliance
- Wall oven
- Code
- F6E2
- Documented meaning
- Communication failure between oven power boards
- Applies to
- 38 KitchenAid models on 2 platforms
- Can you keep using it?
- With caution
What the wall oven is detecting
On these double wall ovens the main power board talks to the second cavity's board. When the second board hears nothing, or the main board gets no reply, F6E2 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose or damaged communication harness between the two power boards.
- Documented A fault on either power board.
Safe checks you can make
- Switch the oven off at the circuit breaker (or unplug it if the plug is easy to reach) for about one minute, restore power, and see whether the code comes back.
- Write down the full code exactly as shown (including any number after a dash) and when it appears; it speeds up diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks power to each board and the communication harness between them.
- Looks for loose, corroded or pinched connectors.
- Determines which board stopped communicating before replacing anything.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Wall oven control board replacement | $350–$830 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The oven may not respond or may stop mid-cycle. A power reset sometimes clears a one-time glitch; a code that returns points to a wiring or board problem that needs diagnosis.
KitchenAid models documented with this code
- KOEC430RSS
- KOEC527PBS
- KOEC527PSS
- KOEC530PBS
- KOEC530PPS
- KOEC530PSS
- KOEC530PWH
- KOEC530SPS
- KOEC630SPS
- KOEC727SPS
- KOEC730SBE
- KOEC730SJP
- KOEC730SPL
- KOEC730SPS
- KOEC730SWH
- KOES430RSS
And 22 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same KitchenAid platforms:
- F1E1
- F1E1-1
- F1E1-4
- F1E1-5
- F1E1-6
- F1E1-7
- F1E1-8
- F1E1-9
- F1E5
- F1E5-1
- F1E5-4
- F1E5-5
- F1E5-6
- F1E5-7
- F1E5-8
- F1E7
- F1E7-1
- F1E7-2
- F1EA
- F2E1
- F2E1-2
- F2E4
- F2E4-1
- F2E4-2
Repair or replace?
A fault code alone rarely justifies replacing a wall oven. Most F6E2 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F6E2 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.