Serving Las Vegas, Henderson, Summerlin, Boulder City(725) 900-0963
Menu
TroubleshootingError CodesRepair CostsRepair or ReplaceBrandsSchedule Appliance RepairCall (725) 900-0963
Error code

Maytag wall oven F1E0: eeprom communication error

F1E0 means the main control stopped talking to its own memory (EEPROM) and locked up after an unexpected communication event.

What F1E0 means

Brand
Maytag
Appliance
Wall oven
Code
F1E0
Documented meaning
EEPROM communication error
Applies to
54 Maytag models on 2 platforms
Can you keep using it?
With caution

What the wall oven is detecting

The control stores settings and calibration in a memory chip and checks every exchange with it. When an exchange fails, the control locks up and stores F1E0. The documentation notes that a power reset often clears it.

Causes listed for this condition

In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.

  1. Documented A one-time communication glitch inside the control, which a power reset may clear.
  2. Documented A main control board that keeps losing contact with its memory, shown by the code returning after a reset.

Safe checks you can make

  • Switch the oven off at the breaker (or unplug it) for at least 30 seconds, restore power and wait about two minutes to see whether F1E0 returns.
  • Write down the full code exactly as shown (including any number after a dash) and when it appears; it speeds up diagnosis.

Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.

What a technician checks

  • Confirms whether the code returns after a full power reset.
  • Reviews the stored fault history for related codes.
  • Replaces the main control only when the code persists after a reset.

Typical repairs and cost

Depending on what diagnosis finds, this code can lead to one of these repairs:

RepairTypical rangeLabor
Wall oven control board replacement$350–$830Moderate

Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.

Can you keep using it?

Use with caution. The control may lock out some or all cooking functions. A power reset may clear the code for a while; if it keeps coming back, the control system needs diagnosis rather than repeated resets.

Maytag models documented with this code

And 38 more. Use the model lookup to check yours.

Other codes documented on the same Maytag platforms:

Repair or replace?

A fault code alone rarely justifies replacing a wall oven. Most F1E0 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.

Need F1E0 diagnosed in the Las Vegas area?

We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.

Schedule Appliance Repair Call (725) 900-0963
Schedule Call (725) 900-0963