Whirlpool cooktop F1E0: user interface fault or model mismatch
F1E0 means the cooktop's user interface (touch control) board reported a fault, or the model setting stored in the system does not match.
What F1E0 means
- Brand
- Whirlpool
- Appliance
- Cooktop
- Code
- F1E0
- Documented meaning
- User interface fault or model mismatch
- Applies to
- 4 Whirlpool models on 2 platforms
- Can you keep using it?
- With caution
What the cooktop is detecting
These cooktops check the user interface board and the stored model setting when entering an operating mode. A failed check sets F1E0. The documentation tries resetting the model setting before replacing the board.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A model setting mismatch, for example after a board replacement.
- Documented A failed user interface board.
Safe checks you can make
- Switch the cooktop off at the circuit breaker for about one minute, restore power, and see whether the code comes back.
- Write down the full code exactly as shown (including any number after a dash) and when it appears; it speeds up diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks and resets the model setting.
- Replaces the user interface board if the fault persists.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Cooktop touch control replacement | $250–$620 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The affected zone or the whole cooktop may be locked out. Do not keep restarting it; if the code returns after a power reset, leave the cooktop off and have it diagnosed.
Whirlpool models documented with this code
Related problems and codes
Other codes documented on the same Whirlpool platforms:
Repair or replace?
A fault code alone rarely justifies replacing a cooktop. Most F1E0 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F1E0 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.