Whirlpool washer F0E6: displacement sensor not detected
F0E6 means the main control does not detect the displacement measurement sensor (DMS) it expects to find.
What F0E6 means
- Brand
- Whirlpool
- Appliance
- Front-load washer
- Code
- F0E6
- Documented meaning
- Displacement sensor not detected
- Applies to
- 8 Whirlpool models on 1 platform
- Can you keep using it?
- With caution
What the washer is detecting
On this platform a displacement measurement sensor reports tub movement to the control. F0E6 is stored when the control finds no sensor attached at all, which points at the connection or the sensor itself.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Possible A disconnected or damaged sensor connection.
- Possible A failed displacement measurement sensor.
- Possible A main control that cannot read the sensor.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Confirms whether the sensor is present and connected.
- Checks the wiring between the sensor and the main control.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The washer may refuse to spin or run normally. Have it checked rather than repeatedly restarting.
Whirlpool models documented with this code
Related problems and codes
Other codes documented on the same Whirlpool platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F0E6 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F0E6 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.