Whirlpool washer F2: keypad or console failure
F2 (F, then 2) means the control found a problem with the keypad or console: a stuck key during diagnostics, or a console fault or mismatch in standby.
What F2 means
- Brand
- Whirlpool
- Appliance
- Top-load washer
- Code
- F2
- Documented meaning
- Keypad or console failure
- Applies to
- 45 Whirlpool models on 3 platforms
- Can you keep using it?
- With caution
What the washer is detecting
In diagnostic mode the control flags a key that stays pressed. In standby it flags an internal console problem or a console that does not match the control.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A stuck key on the keypad.
- Documented An internal console fault or a console that does not match the control.
Safe checks you can make
- Make sure nothing is pressing on the panel and wipe away detergent residue around the buttons.
- Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the console test.
- Confirms the console matches the model.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer user interface / keypad replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. Buttons may not respond correctly. Have the console checked if the code returns.
Whirlpool models documented with this code
- WTW6200SW
- WTW6200VW
- WTW6300SB
- WTW6300SG
- WTW6300SW
- WTW6300WW
- WTW6310WW
- WTW6340WW
- WTW6400SW
- WTW6410WW
- WTW6500WW
- WTW6600SB
- WTW6600SG
- WTW6600SW
- WTW6700TU
- WTW6700TW
And 29 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Whirlpool platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F2 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F2 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.