Whirlpool washer F7E10: motor disconnected
F7E10 means the control sees the drive motor as disconnected.
What F7E10 means
- Brand
- Whirlpool
- Appliance
- Front-load washer
- Code
- F7E10
- Documented meaning
- Motor disconnected
- Applies to
- 19 Whirlpool models on 3 platforms
- Can you keep using it?
- With caution
What the washer is detecting
The control checks for the motor's presence through its windings. When it finds no motor connected, it reports F7E10. The service manual groups it with the lost-phase condition.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose or unplugged motor connector or damaged motor wiring.
- Possible An open motor winding.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks the harness and connections between the control and the motor.
- Runs the motor circuit test.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer drive motor replacement | $300–$720 | Heavy |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The drum will not turn. Have the motor connection checked.
Whirlpool models documented with this code
- WFC682CLW
- WFC9820HC
- WFC9820HW
- WFW5605MC
- WFW5605MW
- WFW560CHW
- WFW5620HC
- WFW5620HW
- WFW6605MC
- WFW6605MW
- WFW6620HC
- WFW6620HC08T
- WFW6620HW
- WFW8620HC
- WFW8620HW
- WFW862CHC
And 3 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Whirlpool platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F7E10 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F7E10 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.