Whirlpool washer Po: pump out (lid left open)
Po means the lid was left open with water in the tub for an extended time, so the washer is pumping the water out.
What Po means
- Brand
- Whirlpool
- Appliance
- Top-load washer
- Code
- Po
- Documented meaning
- Pump out (lid left open)
- Applies to
- 46 Whirlpool models on 4 platforms
- Can you keep using it?
- Generally yes
What the washer is detecting
As a safety feature, when the lid stays open for more than about ten minutes with water in the tub, the control starts the drain pump and shows Po.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented Lid left open during a cycle with water in the tub.
Safe checks you can make
- Close the lid to stop the pump-out, then restart or continue the cycle.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks the lid switch only if Po appears with the lid closed.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Top-load washer lid lock replacement | $180–$370 | Light |
| Washer drain pump replacement | $180–$420 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Generally safe to keep using. Informational. Close the lid and continue.
Whirlpool models documented with this code
- WTW6200SW
- WTW6200VW
- WTW6300SB
- WTW6300SG
- WTW6300SW
- WTW6300WW
- WTW6310WW
- WTW6340WW
- WTW6400SW
- WTW6410WW
- WTW6500WW
- WTW6600SB
- WTW6600SG
- WTW6600SW
- WTW6700TU
- WTW6700TW
And 30 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Whirlpool platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most Po repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need Po diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.