Amana washer F0E2 error code
F0E2 does not mean the same thing on every Amana washer. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Amana models |
|---|---|---|
| Too many suds | Top-load washer | 24 |
| Oversuds | Front-load washer | 1 |
F0E2: Too many suds
- Brand
- Amana
- Appliance
- Top-load washer
- Code
- F0E2
- Documented meaning
- Too many suds
- Applies to
- 24 Amana models on 5 platforms
- Can you keep using it?
- With caution
F0E2 means the washer detected too much suds in the tub, either because suds kept the basket from reaching spin speed or because the water-level sensor saw the foam level rising.
What the washer is detecting
The control watches basket speed and the pressure (level) reading. When foam drags on the basket or pushes the level reading up, the washer first adds water to rinse the suds away; if that flush does not fix it, the cycle stops with F0E2.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented Regular (non-HE) detergent, which foams far more than a low-water top-load is designed for.
- Documented Too much detergent for the load, including double-dosing with pods plus liquid.
- Documented A pinched, plugged or leaking pressure hose between the tub and the level sensor, which distorts the level reading.
- Documented Drag on the drive or basket, for example an item caught between the basket and the outer tub.
Safe checks you can make
- Use only HE detergent, measured for the load size and soil level; cut back if you see heavy suds in the tub.
- If the tub is full of foam, run a Rinse & Spin with no detergent (and no load, if you can remove it) to clear the suds before washing again.
- With the washer unplugged and the basket empty, look and feel around the top edge of the basket and the wash plate for a sock, sheet corner or other item caught between the basket and the outer tub.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Reviews the suds and level readings in service diagnostics.
- Inspects the pressure hose and its connection at the tub and the sensor.
- Checks the drive and basket for mechanical drag.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer water-level pressure sensor repair | $180–$350 | Light |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. Safe to keep using once you switch to HE detergent in the right amount. If the code returns with correct detergent use, have the level-sensing system and drive checked.
Amana models documented with this code
- NTW4500XQ
- NTW4501XQ
- NTW4601XQ
- NTW4605EW
- NTW4610YQ
- NTW4615EW
- NTW4630YQ
- NTW4635EW
- NTW4650YQ
- NTW4655EW
- NTW4665GW
- NTW4705EW
- NTW4755EW
And 11 more. Use the model lookup to check yours.
F0E2: Oversuds
- Brand
- Amana
- Appliance
- Front-load washer
- Code
- F0E2
- Documented meaning
- Oversuds
- Applies to
- 1 Amana model on 1 platform
- Can you keep using it?
- With caution
F0E2 means the washer detected too much suds in the tub and could not clear it with its own rinse-and-flush routine.
What the washer is detecting
The water-level sensing system notices a level rise caused by foam, and on some models the drum also struggles to reach spin speed. The control adds water and flushes to break the suds down; F0E2 is stored when that does not work.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented Detergent that is not marked HE (high efficiency).
- Documented Too much detergent for the load size or water hardness, including pre-treatment products added on top of normal detergent.
- Documented A pinched, kinked, plugged or leaking pressure hose between the tub and the level sensor, which distorts the level reading.
Safe checks you can make
- Use only detergent marked HE, and measure it: front-load washers need far less than older top-loaders.
- Run a Rinse & Spin cycle with the drum empty and no detergent to clear leftover suds before the next load.
- If you use detergent pods, use one pod per load and place it in the drum, not the dispenser, unless your manual says otherwise.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Confirms the suds condition is real by watching a fill and agitate with known detergent use.
- Inspects the pressure hose from the tub to the level sensor for kinks, residue or air leaks.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer water-level pressure sensor repair | $180–$350 | Light |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The washer can be used once the detergent problem is corrected. Expect long cycles and poor rinsing until the suds are cleared.
Amana models documented with this code
Related problems and codes
Other codes documented on the same Amana platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F0E2 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F0E2 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.