Amana washer F5E2 error code
F5E2 does not mean the same thing on every Amana washer. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Amana models |
|---|---|---|
| Lid will not lock | Top-load washer | 24 |
| Door will not lock | Front-load washer | 2 |
F5E2: Lid will not lock
- Brand
- Amana
- Appliance
- Top-load washer
- Code
- F5E2
- Documented meaning
- Lid will not lock
- Applies to
- 24 Amana models on 5 platforms
- Can you keep using it?
- With caution
F5E2 means the washer tried to lock the lid but could not confirm the lock reached its locked position.
What the washer is detecting
Before spinning (and on some models before washing) a small motor or solenoid pushes a lock bolt over the lid strike. If the control cannot confirm the locked position, F5E2 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented The lid not fully closed because something is in the way.
- Documented Interference between the lock and the lid strike or bezel.
- Documented Detergent, softener or lint buildup that keeps the lock bolt from moving.
- Documented The lid switch reading open while the lock is attempted, or the control unable to read the lock state.
Safe checks you can make
- Close the lid fully and make sure nothing (a towel edge, a dispenser cup, a hanging garment) is keeping it from seating on the cabinet.
- Wipe dried detergent or softener residue off the lid strike and around the lock opening on the top panel with a damp cloth.
- Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the lid lock test.
- Checks the lock assembly, strike alignment and lock wiring.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Top-load washer lid lock replacement | $180–$370 | Light |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The washer will stop before spinning until it can lock. Do not force the lid or bypass the lock.
Amana models documented with this code
- NTW4500XQ
- NTW4501XQ
- NTW4601XQ
- NTW4605EW
- NTW4610YQ
- NTW4615EW
- NTW4630YQ
- NTW4635EW
- NTW4650YQ
- NTW4655EW
- NTW4665GW
- NTW4705EW
- NTW4755EW
And 11 more. Use the model lookup to check yours.
F5E2: Door will not lock
- Brand
- Amana
- Appliance
- Front-load washer
- Code
- F5E2
- Documented meaning
- Door will not lock
- Applies to
- 2 Amana models on 2 platforms
- Can you keep using it?
- No — stop and have it checked
F5E2 means the washer tried to lock the door at the start of the cycle and could not confirm that it locked.
What the washer is detecting
Before filling, the control energizes the door lock and checks its feedback. It retries several times; if it still cannot confirm a locked door, it stops with F5E2. Some older displays show dL for this condition.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented The door is not fully closed because of clothing or another obstruction.
- Documented A damaged, misaligned or obstructed door lock or latch.
- Documented The control sees the door switch open while trying to lock.
- Possible A wiring problem between the door lock and the main control.
Safe checks you can make
- Open the door and look for clothing, a sock or a towel caught at the door seal or the latch, then close the door firmly until it clicks.
- Make sure the load fits in the drum without pressing against the door glass.
- Look at the door latch on the door edge: report it if it is bent, cracked or loose.
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the door lock system test to see whether the lock moves and reports correctly.
- Inspects the latch, the lock mechanism and the wiring to the control.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Front-load washer door lock replacement | $180–$400 | Moderate |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Stop using it until it is checked. Do not keep retrying the cycle or try to hold the door shut. A lock that does not confirm closure is a water-release risk if the washer ever starts filling.
Amana models documented with this code
Related problems and codes
Other codes documented on the same Amana platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F5E2 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F5E2 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.