Crosley washer F5E4: lid not opened between cycles
F5E4 means Start was pressed after several cycles in a row without the lid being opened, so the washer asks you to open and close it.
What F5E4 means
- Brand
- Crosley
- Appliance
- Top-load washer
- Code
- F5E4
- Documented meaning
- Lid not opened between cycles
- Applies to
- 16 Crosley models on 5 platforms
- Can you keep using it?
- Generally yes
What the washer is detecting
The control counts cycles between lid openings as a check that the lid switch still works. Too many in a row (or Start pressed with the lid open, on some models) sets F5E4.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented Several cycles run back to back without opening the lid.
- Documented Start pressed with the lid open (listed on some models).
- Documented A lid switch the control cannot see opening and closing.
Safe checks you can make
- Open the lid fully, close it, and press Start again.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the lid lock test if the code returns after opening and closing the lid.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Top-load washer lid lock replacement | $180–$370 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Generally safe to keep using. Normal. Open and close the lid and continue. If it keeps appearing right after you opened the lid, have the lid switch checked.
Crosley models documented with this code
And 6 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Crosley platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F5E4 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F5E4 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.