Crosley washer F6E2 error code
F6E2 does not mean the same thing on every Crosley washer. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Crosley models |
|---|---|---|
| Console not receiving from control | Top-load washer | 5 |
| Console and main control communication | Front-load washer | 1 |
F6E2: Console not receiving from control
- Brand
- Crosley
- Appliance
- Top-load washer
- Code
- F6E2
- Documented meaning
- Console not receiving from control
- Applies to
- 5 Crosley models on 1 platform
- Can you keep using it?
- With caution
F6E2 means the console (user interface) is not receiving data from the main control.
What the washer is detecting
The console and the main control exchange data continuously. When the console detects no messages from the control, F6E2 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A break or loose connection in the console harness.
- Documented A fault on the main control or the console board.
Safe checks you can make
- Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks continuity of the console harness.
- Runs the main control and console tests.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
| Washer user interface / keypad replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. If the washer works normally after a power reset, keep using it; if the code returns, have it diagnosed.
Crosley models documented with this code
F6E2: Console and main control communication
- Brand
- Crosley
- Appliance
- Front-load washer
- Code
- F6E2
- Documented meaning
- Console and main control communication
- Applies to
- 1 Crosley model on 1 platform
- Can you keep using it?
- With caution
F6E2 on these platforms means the console (user interface) and the main control are not communicating.
What the washer is detecting
The console sends your selections to the main control and receives status back. F6E2 is stored when that link fails.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose or damaged cable between the console and the main control.
- Documented A fault on the console board.
- Documented A main control without power or with a fault.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks the cable between the console and the main control.
- Checks power to the main control and runs the console test.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer user interface / keypad replacement | $250–$550 | Light |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The washer may not respond to buttons. Have it checked if the code repeats.
Crosley models documented with this code
Related problems and codes
Other codes documented on the same Crosley platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F6E2 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F6E2 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.