JennAir range F1E1 error code
F1E1 does not mean the same thing on every JennAir range. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | JennAir models |
|---|---|---|
| Relay board memory error | Ranges | 34 |
| Control internal error (A/D) | Ranges | 13 |
F1E1: Relay board memory error
- Brand
- JennAir
- Appliance
- Dual-fuel range, Gas range
- Code
- F1E1
- Documented meaning
- Relay board memory error
- Applies to
- 34 JennAir models on 4 platforms
- Can you keep using it?
- With caution
F1E1 means the control relay board, which switches the oven's heating and motor loads, reported a memory (EEPROM) communication error.
What the range is detecting
On these dual-fuel and gas models the relay board has its own memory. When the system cannot read or write it reliably, F1E1 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A communication fault inside the relay board's memory.
- Possible A connection problem between the relay board and the user interface.
Safe checks you can make
- Switch the oven off at the circuit breaker (or unplug it if the plug is easy to reach) for about one minute, restore power, and see whether the code comes back.
- Write down the full code exactly as shown (including any number after a dash) and when it appears; it speeds up diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Confirms the code after a power reset.
- Checks the harness between the relay board and the display board.
- Tests the relay board before replacement.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Range control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The control may lock out some or all cooking functions. A power reset may clear the code for a while; if it keeps coming back, the control system needs diagnosis rather than repeated resets.
JennAir models documented with this code
- JDRP430HL
- JDRP430HM
- JDRP436HL
- JDRP436HM
- JDRP536HL
- JDRP536HM
- JDRP636HL
- JDRP636HM
- JDRP848HL
- JDRP848HM
- JDSP536HM
- JGRP430HL
- JGRP430HM
- JGRP436HL
- JGRP436HM
- JGRP536HL
And 18 more. Use the model lookup to check yours.
F1E1: Control internal error (A/D)
- Brand
- JennAir
- Appliance
- Electric range
- Code
- F1E1
- Documented meaning
- Control internal error (A/D)
- Applies to
- 13 JennAir models on 1 platform
- Can you keep using it?
- With caution
F1E1 means the main oven control failed an internal check of its analog-to-digital (A/D) circuitry, which turns sensor signals into readings.
What the range is detecting
On these range controls F1E0, F1E1 and F1E2 are listed together as internal board or A/D errors. The control flags F1E1 when its own measuring circuitry does not pass its self-test.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented An internal fault in the main oven control board; the documentation's corrective action is the control itself.
Safe checks you can make
- Switch the oven off at the circuit breaker (or unplug it if the plug is easy to reach) for about one minute, restore power, and see whether the code comes back.
- Write down the full code exactly as shown (including any number after a dash) and when it appears; it speeds up diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Confirms the code in the service diagnostic menu and checks whether other codes are stored with it.
- Checks supply power and the connections at the control before condemning the board.
- Decides from the platform documentation whether the main control or the display board is the part at fault.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Range control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The control may lock out some or all cooking functions. A power reset may clear the code for a while; if it keeps coming back, the control system needs diagnosis rather than repeated resets.
JennAir models documented with this code
- JES1450CDB
- JES1450CDS
- JES1450DB
- JES1450DF
- JES1450DS
- JES1750CEB
- JES1750CES
- JES1750EB
- JES1750EF
- JES1750ES
- JES1750FB
And 2 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same JennAir platforms:
Repair or replace?
A fault code alone rarely justifies replacing a range. Most F1E1 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F1E1 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.