JennAir range F6E9: lost communication with second oven control
F6E9 means the control panel lost communication with the power control board of the second oven (lower or left oven).
What F6E9 means
- Brand
- JennAir
- Appliance
- Dual-fuel range, Gas range
- Code
- F6E9
- Documented meaning
- Lost communication with second oven control
- Applies to
- 34 JennAir models on 4 platforms
- Can you keep using it?
- With caution
What the range is detecting
Each cavity has its own power board. When the second cavity's board stops answering the panel, F6E9 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose or damaged harness to the second oven's control.
- Documented A second oven control board fault.
Safe checks you can make
- Switch the oven off at the circuit breaker (or unplug it if the plug is easy to reach) for about one minute, restore power, and see whether the code comes back.
- Write down the full code exactly as shown (including any number after a dash) and when it appears; it speeds up diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks power to each board and the communication harness between them.
- Looks for loose, corroded or pinched connectors.
- Determines which board stopped communicating before replacing anything.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Range control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The oven may not respond or may stop mid-cycle. A power reset sometimes clears a one-time glitch; a code that returns points to a wiring or board problem that needs diagnosis.
JennAir models documented with this code
- JDRP430HL
- JDRP430HM
- JDRP436HL
- JDRP436HM
- JDRP536HL
- JDRP536HM
- JDRP636HL
- JDRP636HM
- JDRP848HL
- JDRP848HM
- JDSP536HM
- JGRP430HL
- JGRP430HM
- JGRP436HL
- JGRP436HM
- JGRP536HL
And 18 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same JennAir platforms:
Repair or replace?
A fault code alone rarely justifies replacing a range. Most F6E9 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F6E9 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.