Maytag laundry center F7E6 error code
F7E6 does not mean the same thing on every Maytag laundry center. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Maytag models |
|---|---|---|
| Lower dryer motor circuit | Laundry center | 13 |
| Motor fault | Laundry center | 1 |
F7E6: Lower dryer motor circuit
- Brand
- Maytag
- Appliance
- Laundry center
- Code
- F7E6
- Documented meaning
- Lower dryer motor circuit
- Applies to
- 13 Maytag models on 2 platforms
- Can you keep using it?
- With caution
F7E6 on stacked dryer units means the control found a problem in the lower dryer's motor circuit.
What the laundry center is detecting
The control monitors the circuit that runs the lower dryer motor. When it reads abnormally, it reports F7E6. A single occurrence that clears in a diagnostic cycle may be a false indication.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented Loose harness connections at the motor or the control board, or a poor motor ground.
- Documented A control board fault.
- Possible A motor fault.
Safe checks you can make
- Switch off the unit's breaker for one minute, restore it and try a cycle. If the code returns, stop and call for service.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Clears the code and runs a diagnostic cycle.
- Checks the motor and control connections and the motor ground.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Laundry center motor replacement | $280–$620 | Heavy |
| Laundry center control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The lower dryer may not turn or heat. Have it checked if the code returns.
F7E6: Motor fault
- Brand
- Maytag
- Appliance
- Laundry center
- Code
- F7E6
- Documented meaning
- Motor fault
- Applies to
- 1 Maytag model on 1 platform
- Can you keep using it?
- With caution
F7E6 means the washer's control detected an open circuit in the motor's clockwise or counterclockwise drive.
What the laundry center is detecting
The control drives the motor in both directions. When one direction's circuit is open, it reports F7E6.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented An open motor winding or motor wiring.
- Possible A loose connection between the control and the motor.
Safe checks you can make
- Unplug the laundry center (or switch off its breaker) for one minute, then restore power and start a new cycle. A code that returns right away needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the drive system and motor tests.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Laundry center motor replacement | $280–$620 | Heavy |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The washer may not agitate or spin. Have the motor circuit checked.
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a laundry center. Most F7E6 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F7E6 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.