Whirlpool cooktop F0E4: induction coil not drawing current
F0E4 means the induction power board drew less current than expected when it tried to heat a zone, which the documentation links to a coil that is not connected.
What F0E4 means
- Brand
- Whirlpool
- Appliance
- Cooktop
- Code
- F0E4
- Documented meaning
- Induction coil not drawing current
- Applies to
- 10 Whirlpool models on 5 platforms
- Can you keep using it?
- With caution
What the cooktop is detecting
When a zone is switched on, the inverter expects a certain current through the induction coil. Too little current suggests an open coil circuit, and F0E4 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A disconnected or broken induction coil connection.
- Possible A failed induction coil or power board.
Safe checks you can make
- Use cookware that a magnet sticks to firmly, with a flat bottom that matches the size of the cooking zone, and center it on the zone.
- Switch the cooktop off at the circuit breaker for about one minute, restore power, and see whether the code comes back.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- Removes the glass top to reach the internal boards and connections.
- Checks the coil connection to the power board.
- This requires professional testing: the induction power board works with high-voltage, high-current electronics under the glass top.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Cooktop control or induction board replacement | $300–$770 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The affected zone or the whole cooktop may be locked out. Do not keep restarting it; if the code returns after a power reset, leave the cooktop off and have it diagnosed.
Whirlpool models documented with this code
And 7 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Whirlpool platforms:
Repair or replace?
A fault code alone rarely justifies replacing a cooktop. Most F0E4 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F0E4 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.