Whirlpool cooktop F0E8: power board configuration error
F0E8 means the induction power board's configuration does not match the cooktop model, which the documentation links to a replacement board that was not configured.
What F0E8 means
- Brand
- Whirlpool
- Appliance
- Cooktop
- Code
- F0E8
- Documented meaning
- Power board configuration error
- Applies to
- 8 Whirlpool models on 4 platforms
- Can you keep using it?
- With caution
What the cooktop is detecting
After a power board is replaced it must be set up for the specific model. If the stored configuration is missing or wrong, the cooktop stores F0E8.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A replacement power board that was installed but not configured.
- Documented A configuration or board fault after configuration.
Safe checks you can make
- If a board was recently replaced, contact whoever did the repair, since the code points to the setup step.
- Switch the cooktop off at the circuit breaker for about one minute, restore power, and see whether the code comes back.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the parts-configuration procedure for the model.
- This requires professional testing: the induction power board works with high-voltage, high-current electronics under the glass top.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Cooktop control or induction board replacement | $300–$770 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The affected zone or the whole cooktop may be locked out. Do not keep restarting it; if the code returns after a power reset, leave the cooktop off and have it diagnosed.
Whirlpool models documented with this code
And 5 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Whirlpool platforms:
Repair or replace?
A fault code alone rarely justifies replacing a cooktop. Most F0E8 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F0E8 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.