Serving Las Vegas, Henderson, Summerlin, Boulder City(725) 900-0963
Model support

Whirlpool WDT770PAYB Dishwasher

Troubleshooting, fault codes and repair information for the Whirlpool WDT770PAYB, organized around the engineering platform this dishwasher is built on.

Brand
Whirlpool
Model
WDT770PAYB
Engineering revisions
WDT770PAYB0, WDT770PAYB1, WDT770PAYB2, WDT770PAYB3
Appliance
Dishwasher
Platform
Dishwasher platform, documentation from about 2011
Models on this platform
28 across Whirlpool
Documented fault codes
29 with explanations
Service documentation
Tech sheet, service manual (used by our technicians; not published)

Whirlpool WDT770PAYB error codes

These are the fault codes documented for the platform this model belongs to. A code describes a condition the control detected; it does not by itself identify a failed part. Select a code for causes, safe checks and repair context.

CodeMeaningAreas involved
1-1Control: pilot relay stuck onMain control board, Wiring harness and connectors
1-2Control: software issueMain control board
2-1User interface: stuck keyUser interface / keypad board, Wiring harness and connectors
2-2User interface: no response from UIUser interface / keypad board, Main control board, Wiring harness and connectors
3-1Thermistor/OWI: openTemperature sensor (thermistor), Turbidity (soil) sensor, Wiring harness and connectors
3-2Thermistor/OWI: shortedTemperature sensor (thermistor), Turbidity (soil) sensor, Wiring harness and connectors
3-3OWI: failed calibrationTurbidity (soil) sensor, Wiring harness and connectors, Drain pump
4-3Wash motor: motor not runningCirculation (wash) pump and motor, Main control board, Wiring harness and connectors
4-4Wash motor: motor failureCirculation (wash) pump and motor, Main control board, Wiring harness and connectors
5-1Door switch: door stuck openDoor latch and switch, Door switch, Wiring harness and connectors
5-2Door switch: door stuck closedDoor switch, Door latch and switch, Wiring harness and connectors
6-1Inlet water: low or no waterWater inlet valve, Float and float switch, Flow meter
6-2Inlet water: fill valve electrical problemWater inlet valve, Wiring harness and connectors, Main control board
6-3Inlet water: suds or air in pumpDetergent dispenser, Diverter motor and disk, Wiring harness and connectors
6-4Inlet water: float switch open (overfill)Float and float switch, Water inlet valve, Drain pump
6-6Inlet water: cool waterTemperature sensor (thermistor), Wiring harness and connectors
7-1Heating: no heatHeating element, Wiring harness and connectors, Main control board
7-2Heating: heater stuck onMain control board, Heating element
8-1Draining: slow drainDrain pump, Filter assembly
8-2Draining: drain motor electrical problemDrain pump, Wiring harness and connectors, Main control board
8-3Draining: drain stuck onMain control board, Drain pump
8-4Draining: drain motor electrical problemDrain pump, Wiring harness and connectors, Main control board
9-1Diverter: can't find positionDiverter motor and disk, Wiring harness and connectors, Main control board
9-2Diverter: stuck onMain control board, Diverter motor and disk
9-3Diverter: disk missingDiverter motor and disk
9-4Diverter: lower spray arm errorWiring harness and connectors, Main control board
10-1Other: dispenser electrical problemDetergent dispenser, Wiring harness and connectors, Main control board
10-2Other: vent wax motor electrical problemWiring harness and connectors, Main control board
10-3Other: drying fan errorDrying fan, Wiring harness and connectors, Main control board

Common dishwasher problems

  • Not draining
    Documented check order on this platform: Water inlet valve → Water-level pressure sensing
  • Not cleaning
    Documented check order on this platform: Load size or distribution → Filters and spray arms → Detergent type or amount → Diverter → Drive or pump motor
  • Not filling
  • Not drying
    Documented check order on this platform: Dispenser → Exhaust vent restriction → Detergent type or amount → Drive or pump motor
  • Leaking
    Documented check order on this platform: Drive or pump motor → Detergent type or amount → Exhaust vent restriction
  • Not starting
    Documented check order on this platform: User interface / keypad
  • Lights blinking
    Documented check order on this platform: Detergent type or amount

Typical dishwasher repair costs

RepairTypical rangeLabor
Dishwasher drain pump replacement$180–$400Moderate
Dishwasher water inlet valve replacement$180–$360Light
Dishwasher door latch replacement$180–$350Light
Dishwasher door switch replacement$180–$320Light
Dishwasher detergent dispenser replacement$180–$370Moderate
Dishwasher thermistor or turbidity sensor replacement$180–$330Light
Dishwasher circulation pump and wash motor replacement$300–$620Heavy
Dishwasher heating element or drying fan replacement$190–$410Moderate
Dishwasher diverter motor replacement$180–$390Moderate
Dishwasher main control board replacement$260–$590Moderate

Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.

Repair or replace?

Dishwashers typically last about 9–12 years. Service documentation for this platform dates from about 2011, so the oldest units built on it are now around 15 years old. The age printed in the serial number, the repair cost and the condition of the rest of the appliance decide it. Use the repair-or-replace guide.

These models share this platform's service documentation, so fault codes and most diagnostic steps are the same.

Need your Whirlpool WDT770PAYB repaired in the Las Vegas area?

We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.

Schedule Call (725) 900-0963