Whirlpool range F2E0 error code
F2E0 does not mean the same thing on every Whirlpool range. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Whirlpool models |
|---|---|---|
| Shorted key | Ranges | 361 |
| Keypad disconnected | Ranges | 123 |
F2E0: Shorted key
- Brand
- Whirlpool
- Appliance
- Electric range, Gas range
- Code
- F2E0
- Documented meaning
- Shorted key
- Applies to
- 361 Whirlpool models on 21 platforms
- Can you keep using it?
- With caution
F2E0 means the oven control sees a key on the touch panel as permanently pressed, which it treats as a shorted key.
What the range is detecting
The control scans the keypad for presses. When a key reads as closed continuously, it is treated as shorted and F2E0 is stored. On these older range controls the documented action is at the control.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A shorted key or keypad circuit.
- Documented A main control fault reading the keypad.
- Possible Moisture or a cleaning spray that got under the keypad overlay.
Safe checks you can make
- Wipe the control panel with a lightly damp cloth, dry it, and check that nothing is leaning on or touching the keypad.
- Switch the oven off at the circuit breaker (or unplug it if the plug is easy to reach) for about one minute, restore power, and see whether the code comes back.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Confirms the code in diagnostics.
- Checks the keypad and its connection to the control.
- Decides between keypad and control replacement.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Range touchpad / user interface replacement | $250–$550 | Light |
| Range control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The panel may ignore commands or lock out cooking. If keys act on their own or the oven turns on unexpectedly, switch the oven off at the breaker until it is repaired.
Whirlpool models documented with this code
- WEC310S0FB
- WEC310S0FS
- WEC310S0FW
- WEC310SAGB
- WEC310SAGS
- WEC310SAGW
- WEC530H0DB
- WEC530H0DS
- WEC530H0DW
- WEE510S0FB
- WEE510S0FS
- WEE510S0FV
- WEE510S0FW
- WEE510SAGB
- WEE510SAGS
- WEE510SAGW
And 345 more. Use the model lookup to check yours.
F2E0: Keypad disconnected
- Brand
- Whirlpool
- Appliance
- Electric range, Gas range
- Code
- F2E0
- Documented meaning
- Keypad disconnected
- Applies to
- 123 Whirlpool models on 12 platforms
- Can you keep using it?
- With caution
F2E0 means the main control can no longer detect the keypad, as if the keypad were unplugged.
What the range is detecting
The main control expects to see the keypad connected at all times. If the keypad disappears for about a minute, F2E0 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose or unplugged keypad cable at the main control.
- Documented A damaged keypad cable or connector.
- Documented A failed keypad or display/control panel assembly.
Safe checks you can make
- Switch the oven off at the circuit breaker (or unplug it if the plug is easy to reach) for about one minute, restore power, and see whether the code comes back.
- Write down the full code exactly as shown (including any number after a dash) and when it appears; it speeds up diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Inspects the keypad cable and connector at the main control.
- Allows the control time to re-detect the keypad after reconnecting.
- Replaces the keypad or panel assembly if the code returns.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Range touchpad / user interface replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The panel may ignore commands or lock out cooking. If keys act on their own or the oven turns on unexpectedly, switch the oven off at the breaker until it is repaired.
Whirlpool models documented with this code
- WEE515S0LB
- WEE515S0LS
- WEE515S0LV
- WEE515S0LW
- WEE515S0LZ
- WEE515SALB
- WEE515SALS
- WEE515SALW
- WEE745H0LS
- WEE745H0LZ
- WEG730H0DB
- WEG730H0DS
- WEG730H0DW
- WEG745H0FE
- WEG745H0FH
- WEG745H0FS
And 107 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Whirlpool platforms:
Repair or replace?
A fault code alone rarely justifies replacing a range. Most F2E0 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F2E0 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.