Whirlpool range F9E0-2: missing supply leg
F9E0-2 means the range control sees no voltage on one of the two hot supply lines (L2).
What F9E0-2 means
- Brand
- Whirlpool
- Appliance
- Electric range, Gas range
- Code
- F9E0-2
- Documented meaning
- Missing supply leg
- Applies to
- 40 Whirlpool models on 6 platforms
- Can you keep using it?
- No — stop and have it checked
What the range is detecting
A 240-volt range needs both hot lines. When the control finds the second one missing at power-up, it stores F9E0-2.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Possible A tripped half of a double breaker or a failed breaker.
- Documented A loose or disconnected wire at the terminal block or in the house circuit.
Safe checks you can make
- Check the range's double circuit breaker: switch it fully off and back on. If it trips again or the code returns, stop and call for service.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- This requires professional testing: verifying the house supply and the connection at the terminal block means measuring live 240-volt circuits.
- Checks the power cord or conduit connection at the appliance terminal block.
- Checks the wiring between the terminal block and the control.
Can you keep using it?
Stop using it until it is checked. Do not use the appliance until the power connection is checked by a qualified technician or electrician. A reversed or missing supply conductor can leave parts energized that should not be.
Whirlpool models documented with this code
- WFES5030RB
- WFES5030RS
- WFES5030RV
- WFES5030RW
- WFES5030RZ
- WFES5730SB
- WFES5730SV
- WFES5730SW
- WFES5730SZ
- WFES7530RB
- WFES7530RV
- WFES7530RW
- WFES7530RZ
- WFGS5030RB
- WFGS5030RS
- WFGS5030RV
And 24 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Whirlpool platforms:
Repair or replace?
A fault code alone rarely justifies replacing a range. Most F9E0-2 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F9E0-2 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.