KitchenAid range F3E3 error code
F3E3 does not mean the same thing on every KitchenAid range. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | KitchenAid models |
|---|---|---|
| Meat probe short circuit | Ranges | 45 |
| Self-clean over temperature | Ranges | 38 |
F3E3: Meat probe short circuit
- Brand
- KitchenAid
- Appliance
- Dual-fuel range, Gas range
- Code
- F3E3
- Documented meaning
- Meat probe short circuit
- Applies to
- 45 KitchenAid models on 4 platforms
- Can you keep using it?
- With caution
F3E3 means the control reads a short circuit at the meat probe input of the main oven, either in the probe itself or in its jack.
What the range is detecting
When the meat probe is plugged in, the control reads its temperature sensor through the jack in the oven wall. A reading consistent with a short sets F3E3.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A damaged meat probe, for example a cable pinched in the door or overheated by a broil element.
- Documented A shorted or contaminated probe jack, or wiring behind it.
Safe checks you can make
- Unplug the meat probe from its jack in the oven wall, look for a pinched or burned cable, and try the oven without the probe.
- Switch the oven off at the circuit breaker (or unplug it if the plug is easy to reach) for about one minute, restore power, and see whether the code comes back.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks the probe and the probe jack in the oven wall for damage or contamination.
- Checks the wiring from the jack to the control.
- Tests with a known-good probe.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Range control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. You can usually cook without the probe; do not use the probe until the fault is fixed.
KitchenAid models documented with this code
- KFDC500HSS
- KFDC500JSS
- KFDC506HSS
- KFDC506JSS
- KFDC558HSS
- KFDC558JSS
- KFDD948SAG
- KFDD948SBE
- KFDD948SDC
- KFDD948SJP
- KFDD948SPL
- KFDD948SSC
- KFDD948SSS
- KFDD948SWF
- KFGD948SAG
- KFGD948SBE
And 29 more. Use the model lookup to check yours.
F3E3: Self-clean over temperature
- Brand
- KitchenAid
- Appliance
- Dual-fuel range, Electric range, Gas range
- Code
- F3E3
- Documented meaning
- Self-clean over temperature
- Applies to
- 38 KitchenAid models on 6 platforms
- Can you keep using it?
- No — stop and have it checked
F3E3 means the range control detected an oven temperature above its safe limit during a self-clean cycle.
What the range is detecting
Self-clean runs far hotter than cooking, and the control enforces a separate ceiling for it. A reading above that ceiling during clean sets F3E3; the documented checks start with the sensor circuit.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented An oven temperature sensor or its wiring giving a falsely high reading.
- Possible A heating circuit that keeps running after the control tries to switch it off.
Safe checks you can make
- If you smell gas at any point, do not touch switches or controls; leave the home and call your gas utility or 911 from outside.
- If the code appeared during or after a self-clean, press Cancel or Off, let the oven cool for at least an hour, and never force a locked door open.
- Switch the oven off at the circuit breaker (or unplug it if the plug is easy to reach) for about one minute, restore power, and see whether the code comes back.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- Compares the actual cavity temperature with the control's reading to separate a false reading from real overheating.
- Checks the oven sensor and its wiring.
- This requires professional testing: finding a heating circuit that stays powered means working on live line-voltage circuits.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Oven temperature sensor replacement | $180–$320 | Light |
| Oven door lock motor and latch replacement | $220–$470 | Moderate |
| Range control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Stop using it until it is checked. Turn the oven off and do not use it until it is checked. If it keeps heating with no cook function selected, switch the circuit breaker off. On a gas range, if you smell gas, leave the home and call the gas utility.
KitchenAid models documented with this code
- KFEG500EBL
- KFEG500EBS
- KFEG500ESS
- KFEG500EWH
- KFGG500EBL
- KSDB900EBS
- KSEB900EBL
- KSEB900EBS
- KSEB900ESS
- KSEB900EWH
- KSEG700EBL
- KSEG700EBS
- KSEG700ESS
- KSEG700EWH
- KSEG950ESS
- KSGB900EBL
And 22 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same KitchenAid platforms:
Repair or replace?
A fault code alone rarely justifies replacing a range. Most F3E3 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F3E3 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.