KitchenAid range F6E1: oven over temperature
F6E1 means the control measured an oven temperature above the limit allowed for normal cooking (documented as about 600°F on several platforms) and locked the oven out.
What F6E1 means
- Brand
- KitchenAid
- Appliance
- Dual-fuel range, Electric range, Gas range
- Code
- F6E1
- Documented meaning
- Oven over temperature
- Applies to
- 89 KitchenAid models on 13 platforms
- Can you keep using it?
- No — stop and have it checked
What the range is detecting
Outside self-clean the control expects the cavity to stay below a fixed ceiling. When the sensor reports more than that, it shuts off heating and locks the cavity until it cools. Either real overheating or a false sensor reading can cause it.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A heating circuit that stays powered when the control has not called for heat, for example a relay stuck on or an element shorted to ground.
- Documented An oven sensor or sensor wiring fault that makes the oven read hotter than it is.
- Documented A control board fault in the sensor input.
Safe checks you can make
- If you smell gas at any point, do not touch switches or controls; leave the home and call your gas utility or 911 from outside.
- Let the oven cool down completely before trying another cycle.
- Note whether the oven was actually very hot or near room temperature when the code appeared; that tells the technician which path to check.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- Compares the actual cavity temperature with the control's reading to separate a false reading from real overheating.
- Checks the oven sensor and its wiring.
- This requires professional testing: finding a heating circuit that stays powered means working on live line-voltage circuits.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Oven temperature sensor replacement | $180–$320 | Light |
| Range control board replacement | $300–$720 | Moderate |
| Oven bake or broil element replacement | $180–$420 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Stop using it until it is checked. Turn the oven off and do not use it until it is checked. If it keeps heating with no cook function selected, switch the circuit breaker off. On a gas range, if you smell gas, leave the home and call the gas utility.
KitchenAid models documented with this code
- KFDC500HSS
- KFDC500JSS
- KFDC506HSS
- KFDC506JSS
- KFDC558HSS
- KFDC558JSS
- KFDD948SAG
- KFDD948SBE
- KFDD948SDC
- KFDD948SJP
- KFDD948SPL
- KFDD948SSC
- KFDD948SSS
- KFDD948SWF
- KFEG500EBL
- KFEG500EBS
And 73 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same KitchenAid platforms:
Repair or replace?
A fault code alone rarely justifies replacing a range. Most F6E1 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F6E1 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.