Whirlpool WGD4810BQ Gas dryer
Troubleshooting, fault codes and repair information for the Whirlpool WGD4810BQ, organized around the engineering platform this gas dryer is built on.
- Brand
- Whirlpool
- Model
- WGD4810BQ
- Engineering revisions
- WGD4810BQ, WGD4810BQ0, WGD4810BQ1
- Appliance
- Gas dryer
- Platform
- Gas dryer platform, documentation from about 2015
- Models on this platform
- 28 across Admiral, Amana, Crosley, Maytag, Roper, Whirlpool
- Documented fault codes
- 10 with explanations
- Service documentation
- Tech sheet, service manual (used by our technicians; not published)
Whirlpool WGD4810BQ error codes
These are the fault codes documented for the platform this model belongs to. A code describes a condition the control detected; it does not by itself identify a failed part. Select a code for causes, safe checks and repair context.
| Code | Meaning | Areas involved |
|---|---|---|
| F01 | Primary control failure | Main control board |
| F02 | Keypad or user interface failure | User interface / keypad board |
| F22 | Exhaust thermistor open | Temperature sensor (thermistor), Wiring harness and connectors, Main control board |
| F23 | Exhaust thermistor shorted | Temperature sensor (thermistor), Wiring harness and connectors, Main control board |
| F24 | Inlet thermistor open | Temperature sensor (thermistor), Wiring harness and connectors |
| F25 | Inlet thermistor shorted | Temperature sensor (thermistor), Wiring harness and connectors |
| F26 | Motor drive system failure | Drive motor, Drive belt, Door switch |
| F28 | Moisture sensor open | Moisture sensor bars, Wiring harness and connectors |
| F29 | Moisture sensor shorted | Moisture sensor bars, Wiring harness and connectors |
| F30 | Restricted airflow condition | Exhaust vent duct, Blower wheel |
Common dryer problems
- Not heating
Documented check order on this platform: Heating element - Not starting
Documented check order on this platform: Power supply to the appliance → Wiring and connectors → User interface / keypad → Lid or door switch / lock → Drive belt - Takes too long to dry
Documented check order on this platform: User interface / keypad - Drum not turning
Documented check order on this platform: Drive belt → Power supply to the appliance → Lid or door switch / lock → Drive or pump motor - Noisy
- Shuts off early
Documented check order on this platform: Exhaust vent restriction - Overheating
Documented check order on this platform: Heating element
Typical dryer repair costs
| Repair | Typical range | Labor |
|---|---|---|
| Dryer thermal fuse and thermostat replacement | $180–$310 | Light |
| Gas dryer valve coil or gas valve replacement | $180–$420 | Moderate |
| Gas dryer igniter and flame sensor replacement | $180–$370 | Light |
| Dryer drive motor or blower wheel replacement | $250–$550 | Heavy |
| Dryer drum belt replacement | $180–$320 | Light |
| Dryer drum rollers, glides and idler pulley replacement | $190–$420 | Moderate |
| Dryer moisture sensor bar repair | $180–$310 | Light |
| Dryer door switch replacement | $180–$290 | Light |
| Dryer exhaust thermistor replacement | $180–$290 | Light |
| Dryer main control board replacement | $280–$640 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Repair or replace?
Dryers typically last about 12–14 years. Service documentation for this platform dates from about 2015, so the oldest units built on it are now around 11 years old. The age printed in the serial number, the repair cost and the condition of the rest of the appliance decide it. Use the repair-or-replace guide.
Models built on the same platform
These models share this platform's service documentation, so fault codes and most diagnostic steps are the same.
- Whirlpool WGD4750XQ
- Whirlpool WGD4800BQ
- Whirlpool WGD4800XQ
- Whirlpool WGD4810EW
- Whirlpool WGD4850XQ
- Whirlpool WGD4910XQ
- Whirlpool WGD4916FW
- Admiral AGD4475YQ
- Admiral AGD4675EW
- Admiral AGD4675YQ
- Crosley CGD126SAQ
- Crosley CGD126SXQ
- Crosley CGD137SAQ
- Maytag MGDC100YQ
- Maytag MGDC200XW
- Maytag MGDC215EW
- Maytag MGDC300BW
- Amana NGD4400YQ
- Amana NGD4500YQ
- Amana NGD4600YQ
- Amana NGD4655EW
- Amana NGD4700YQ
- Amana NGD4705EW
- Roper RGD4440YQ
- Roper RGD4516FW
- Roper RGD4640YQ
- Roper RGD4645EW
Need your Whirlpool WGD4810BQ repaired in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.