Whirlpool WEGA50H0HZ Gas range
Troubleshooting, fault codes and repair information for the Whirlpool WEGA50H0HZ, organized around the engineering platform this gas range is built on.
- Brand
- Whirlpool
- Model
- WEGA50H0HZ
- Engineering revisions
- WEGA50H0HZ0
- Appliance
- Gas range
- Platform
- Gas range platform, documentation from about 2014
- Models on this platform
- 41 across JennAir, KitchenAid, Maytag, Whirlpool
- Documented fault codes
- 15 with explanations
- Service diagnostic mode
- Yes — a console-only test mode used by technicians to read stored codes and run component tests
- Service documentation
- Tech sheet, service manual (used by our technicians; not published)
Whirlpool WEGA50H0HZ error codes
These are the fault codes documented for the platform this model belongs to. A code describes a condition the control detected; it does not by itself identify a failed part. Select a code for causes, safe checks and repair context.
| Code | Meaning | Areas involved |
|---|---|---|
| F1E0 | EEPROM communication error | Main control board |
| F2E0 | Keypad disconnected | User interface / keypad board, Wiring harness and connectors |
| F2E1 | Stuck or shorted key | User interface / keypad board, Wiring harness and connectors |
| F3E0 | Oven temperature sensor open or shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E1 | Oven sensor shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E2 | Warming drawer sensor open or shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E3 | Self-clean over temperature | Oven temperature sensor, Oven door lock motor and latch, Main control board |
| F5E0 | Door and lock switches do not agree | Oven door lock motor and latch, Wiring harness and connectors, Main control board |
| F5E2 | Door position switches do not agree | Oven door lock motor and latch, Wiring harness and connectors |
| F6E0 | Lost communication with user interface | Wiring harness and connectors, User interface / keypad board, Main control board |
| F6E1 | Oven over temperature | Oven temperature sensor, Relay / power board, Bake element |
| F6E4 | Panel and control out of sync | Wiring harness and connectors, Relay / power board, User interface / keypad board |
| F8E0 | Cooling fan too slow | Cooling fan, Wiring harness and connectors, Main control board |
| F8E2 | Cooling fan too fast | Cooling fan, Wiring harness and connectors |
| F9E0 | Power supply miswired | Wiring harness and connectors, Main control board |
Common range problems
- Oven not heating
- Temperature inaccurate
- Burner won't light
- Door locked
- Igniter keeps clicking
- Controls not responding
Typical range repair costs
| Repair | Typical range | Labor |
|---|---|---|
| Gas oven igniter replacement | $190–$410 | Light |
| Gas range oven safety valve or burner valve replacement | $250–$570 | Moderate |
| Range surface burner spark ignition repair | $180–$370 | Light |
| Oven temperature sensor replacement | $180–$320 | Light |
| Oven door lock motor and latch replacement | $220–$470 | Moderate |
| Oven convection fan replacement | $220–$470 | Moderate |
| Range control board replacement | $300–$720 | Moderate |
| Range touchpad / user interface replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Repair or replace?
Ranges typically last about 13–17 years. Service documentation for this platform dates from about 2014, so the oldest units built on it are now around 12 years old. The age printed in the serial number, the repair cost and the condition of the rest of the appliance decide it. Use the repair-or-replace guide.
Models built on the same platform
These models share this platform's service documentation, so fault codes and most diagnostic steps are the same.
- Whirlpool WEG730H0DB
- Whirlpool WEG730H0DS
- Whirlpool WEG730H0DW
- Whirlpool WEG745H0FE
- Whirlpool WEG745H0FH
- Whirlpool WEG745H0FS
- Whirlpool WEG745H0LZ
- Whirlpool WEG750H0H
- Whirlpool WEG750H0HB
- Whirlpool WEG750H0HS
- Whirlpool WEG750H0HV
- Whirlpool WEG750H0HW
- Whirlpool WEG750H0HZ
- Whirlpool WEG760H0DE
- Whirlpool WEG760H0DH
- Whirlpool WEG760H0DS
- Whirlpool WEG950H0HZ
- Whirlpool WEGA25H0H
- Whirlpool WEGA25H0HN
- Whirlpool WEGA25H0HZ
- Whirlpool WEGA50H0HN
- JennAir JGS1450DB
- JennAir JGS1450DP
- JennAir JGS1450DS
- JennAir JGS1450DW
- JennAir JGS1450FB
- JennAir JGS1450FP
- JennAir JGS1450FS
- KitchenAid KSGB900EBL
- KitchenAid KSGB900EBS
Need your Whirlpool WEGA50H0HZ repaired in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.