Whirlpool WFG710H0AE Gas range
Troubleshooting, fault codes and repair information for the Whirlpool WFG710H0AE, organized around the engineering platform this gas range is built on.
- Brand
- Whirlpool
- Model
- WFG710H0AE
- Engineering revisions
- WFG710H0AE0, WFG710H0AE1, WFG710H0AE2
- Appliance
- Gas range
- Platform
- Gas range platform, documentation from about 2012
- Models on this platform
- 30 across Maytag, Whirlpool
- Documented fault codes
- 21 with explanations
- Service diagnostic mode
- Yes — a console-only test mode used by technicians to read stored codes and run component tests
- Service documentation
- Tech sheet, service manual (used by our technicians; not published)
Revision matters. Different engineering revisions of this model are documented on more than one platform. Confirm the full model number, including the last digit, on the model tag.
Whirlpool WFG710H0AE error codes
These are the fault codes documented for the platform this model belongs to. A code describes a condition the control detected; it does not by itself identify a failed part. Select a code for causes, safe checks and repair context.
| Code | Meaning | Areas involved |
|---|---|---|
| F1E0 | EEPROM communication error | Main control board |
| F1E5 | Sensor value out of range | Main control board |
| F1E7 | Control board temperature sensor fault | Main control board, Cooling fan |
| F2E0 | Keypad disconnected | User interface / keypad board, Wiring harness and connectors |
| F2E1 | Stuck or shorted key | User interface / keypad board, Wiring harness and connectors |
| F2E2 | Cancel/Off key error | User interface / keypad board |
| F3E0 | Oven temperature sensor open or shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E1 | Oven sensor shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E2 | Warming drawer sensor open or shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E3 | Self-clean over temperature | Oven temperature sensor, Oven door lock motor and latch, Main control board |
| F5E0 | Door and lock switches do not agree | Oven door lock motor and latch, Wiring harness and connectors, Main control board |
| F5E1 | Door latch not operating | Oven door lock motor and latch, Wiring harness and connectors, Main control board |
| F5E2 | Door position switches do not agree | Oven door lock motor and latch, Wiring harness and connectors |
| F6E0 | Lost communication with user interface | Wiring harness and connectors, User interface / keypad board, Main control board |
| F6E1 | Oven over temperature | Oven temperature sensor, Relay / power board, Bake element |
| F6E2 | Self-clean over temperature | Oven temperature sensor, Relay / power board, Main control board |
| F6E3 | Warming drawer over temperature | Oven temperature sensor, Relay / power board |
| F6E4 | Panel and control out of sync | Wiring harness and connectors, Relay / power board, User interface / keypad board |
| F8E0 | Cooling fan too slow | Cooling fan, Wiring harness and connectors, Main control board |
| F8E2 | Cooling fan too fast | Cooling fan, Wiring harness and connectors |
| F9E0 | Power supply miswired | Wiring harness and connectors, Main control board |
Common range problems
- Oven not heating
- Temperature inaccurate
- Burner won't light
- Door locked
- Igniter keeps clicking
- Controls not responding
Typical range repair costs
| Repair | Typical range | Labor |
|---|---|---|
| Gas oven igniter replacement | $190–$410 | Light |
| Gas range oven safety valve or burner valve replacement | $250–$570 | Moderate |
| Range surface burner spark ignition repair | $180–$370 | Light |
| Oven temperature sensor replacement | $180–$320 | Light |
| Oven door lock motor and latch replacement | $220–$470 | Moderate |
| Oven convection fan replacement | $220–$470 | Moderate |
| Range control board replacement | $300–$720 | Moderate |
| Range touchpad / user interface replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Repair or replace?
Ranges typically last about 13–17 years. Service documentation for this platform dates from about 2012, so the oldest units built on it are now around 14 years old. The age printed in the serial number, the repair cost and the condition of the rest of the appliance decide it. Use the repair-or-replace guide.
Models built on the same platform
These models share this platform's service documentation, so fault codes and most diagnostic steps are the same.
- Whirlpool WFG710H0AH
- Whirlpool WFG710H0AS
- Whirlpool WFG710H0DE
- Whirlpool WFG710H0DH
- Whirlpool WFG710H0DS
- Whirlpool WFG714HLAS
- Whirlpool WFG715H0EE
- Whirlpool WFG715H0EH
- Whirlpool WFG715H0ES
- Whirlpool WFG720H0AS
- Whirlpool WFG975H0HV
- Whirlpool WFG975H0HZ
- Whirlpool WFGA50H0HN
- Whirlpool WFGA50H0HZ
- Whirlpool WFGA75H0HN
- Whirlpool WFGA75H0HZ
- Maytag MGR8800DE
- Maytag MGR8800DH
- Maytag MGR8800DS
- Maytag MGR8800FB
- Maytag MGR8800FE
- Maytag MGR8800FH
- Maytag MGR8800FW
- Maytag MGR8800FZ
- Maytag MGR8800HK
- Maytag MGR8850DS
- Maytag MGR8880AB
- Maytag MGR8880AS
- Maytag MGR8880AW
Need your Whirlpool WFG710H0AE repaired in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.