Inglis washer F7E0: loss of power
F7E0 means the main control saw its supply voltage drop too low or disappear.
What F7E0 means
- Brand
- Inglis
- Appliance
- Top-load washer
- Code
- F7E0
- Documented meaning
- Loss of power
- Applies to
- 8 Inglis models on 2 platforms
- Can you keep using it?
- With caution
What the washer is detecting
The main control monitors the power it receives. A brownout, an interrupted connection or a supply fault that pulls the voltage below its limit sets F7E0.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A problem with the outlet, circuit breaker, fuse or the building wiring to the washer.
- Documented A damaged power cord or loose connection where the cord enters the washer.
- Documented A fault in the main control's power circuit.
Safe checks you can make
- Check that the washer is plugged firmly into a wall outlet (not an extension cord) and that its circuit breaker has not tripped; reset the breaker once if it has.
- Notice whether lights dim or other appliances on the same circuit act up; that points to the household supply.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- Checks the supply circuit and power cord.
- Runs the main control test.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. If it happened once during a storm or outage, the washer can be used. If it repeats, stop and have it checked: testing outlets and supply wiring involves live voltage and requires professional testing.
Inglis models documented with this code
And 2 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Inglis platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F7E0 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F7E0 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.