Inglis washer support & repair
Troubleshooting, error codes and repair costs for Inglis washers. Our data covers 20 Inglis washer models across 12 engineering platforms.
Common Inglis washer problems
Washer not draining
A washer that won't drain is first checked for something blocking the water's path: a kinked or badly installed drain…
Washer not spinning
A washer that won't spin is either being told not to spin by a safety or load check, or it cannot turn the basket…
Washer not filling with water
A washer that won't fill is first checked at the supply: both faucets fully open, hoses not kinked, and the small…
Washer not agitating or washing
A top-load washer that fills but won't agitate is often working as designed: impeller models move the load gently with…
Washer leaking water
Where the water appears is the best clue to a washer leak. Water at the back points to the fill hoses or the drain…
Washer won't start
A washer that won't start either has no power, has a feature turned on that blocks starting, or cannot confirm that…
Washer shaking, walking or making noise
Washer shaking is checked first at installation and loading: shipping bolts left in a new front-loader, a washer not…
Washer door or lid stuck locked
A washer keeps the lid or door locked whenever it thinks there is water in the tub, the drum is still turning, or the…
Washer stops mid-cycle
A washer that stops mid-cycle has hit a condition it cannot get past: water not leaving fast enough, a fill that takes…
Washer smells bad
A washer that smells musty or sour has residue and moisture left inside: detergent and softener buildup, a damp door…
Inglis washer error codes
| Code | Meaning | Models |
|---|---|---|
| F0E2 | Too many suds / Oversuds (varies by model) | 12 |
| F0E3 | Overload | 8 |
| F0E4 | Rinse water too hot / High water temperature (varies by model) | 12 |
| F0E5 | Off-balance load / Off-balance load (varies by model) | 12 |
| F1E1 | Main control fault / Main control fault (varies by model) | 12 |
| F1E2 | Motor control fault / Motor control fault (varies by model) | 12 |
| F1E3 | Control and console mismatch | 8 |
| F2E1 | Stuck button | 11 |
| F2E3 | Control and console mismatch / Console switch mismatch (varies by model) | 11 |
| F2E4 | Console software incompatible | 8 |
| F2E5 | Console memory corrupt | 8 |
| F3E1 | Pressure system fault / Water level sensor fault (varies by model) | 12 |
| F3E2 | Inlet water temperature sensor fault / Water temperature sensor fault (varies by model) | 12 |
| F4E1 | Heater stuck on / Wash heater fault (varies by model) | 9 |
| F4E2 | Heater not turning on / Wash heater not turning on (varies by model) | 9 |
| F5E1 | Lid switch fault / Door switch fault (varies by model) | 12 |
| F5E2 | Lid will not lock / Door will not lock (varies by model) | 12 |
| F5E3 | Lid will not unlock / Door will not unlock (varies by model) | 12 |
| F5E4 | Lid not opened between cycles / Door not opened between cycles (varies by model) | 12 |
| F6E2 | Console not receiving from control / Console and main control communication (varies by model) | 9 |
| F6E3 | Main control not receiving from console / Main control to motor control communication (varies by model) | 9 |
| F7E0 | Loss of power | 8 |
| F7E1 | Basket speed sensing fault | 11 |
| F7E2 | Motor drive failure / Motor control overheat or internal fault (varies by model) | 9 |
| F7E3 | Basket engaged during wash | 8 |
| F7E4 | Basket re-engagement failure | 8 |
| F7E5 | Shifter fault | 11 |
| F7E6 | Motor circuit open | 11 |
| F7E7 | Motor unable to reach target speed | 11 |
| F7E8 | Motor overheating / Motor over temperature (varies by model) | 9 |
| F7E9 | Locked rotor / Motor locked rotor (varies by model) | 9 |
| F8E1 | No fill or long fill / Long fill / no fill (varies by model) | 12 |
| F8E3 | Overflow / Overflow (varies by model) | 12 |
| F8E5 | Hot and cold reversed | 11 |
| F8E6 | Water hazard (water with lid open) | 8 |
| F9E1 | Long drain / Long drain (varies by model) | 12 |
How Inglis washers are organized
Models are grouped by engineering platform: models on the same platform share their service documentation, fault-code list and most diagnostic steps, even when they carry different brand names. That is why we ask for the model number when you have it.
| Type | Docs from | Models | Codes | Examples |
|---|---|---|---|---|
| Top-load washer | 2016 | 5 | 36 | ITW4671EW, ITW4771EW, ITW4871FW |
| Top-load washer | 2014 | 3 | 36 | ITW4671DQ, ITW4771DQ, ITW4971DQ |
| Top-load washer | 2011 | 2 | 21 | ITW4600YQ, ITW4700YQ |
| Top-load washer | 2006 | 2 | 0 | ITW4100SQ, ITW4200SQ |
| Front-load washer | 2019 | 1 | 30 | IFW5900HW |
| Top-load washer | 2010 | 1 | 21 | ITW4300XQ |
| Front-load washer | 2011 | 1 | 0 | IFW7300WW |
| Top-load washer | 2008 | 1 | 0 | ITW4200WQ |
| Top-load washer | 2008 | 1 | 0 | ITW4300SQ |
| Top-load washer | 2008 | 1 | 0 | ITW4300TQ |
Inglis washer repair costs
| Repair | Typical range | Labor |
|---|---|---|
| Washer drain pump replacement | $180–$420 | Moderate |
| Washer water inlet valve replacement | $180–$360 | Light |
| Washer water-level pressure sensor repair | $180–$350 | Light |
| Top-load washer lid lock replacement | $180–$370 | Light |
| Front-load washer door lock replacement | $180–$400 | Moderate |
| Washer drive belt replacement | $180–$330 | Light |
| Washer suspension rods, springs or dampers replacement | $180–$440 | Moderate |
| Washer detergent dispenser repair | $180–$350 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Repair or replace?
Washers typically last 10–13 years. Use the repair-or-replace guide to weigh age, repair cost and condition.
Inglis washer models
A selection of models with the most complete data. Use the lookup above for any model.
Inglis washer repair in Las Vegas
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.