KitchenAid KDTF924PPS Dishwasher
Troubleshooting, fault codes and repair information for the KitchenAid KDTF924PPS, organized around the engineering platform this dishwasher is built on.
- Brand
- KitchenAid
- Model
- KDTF924PPS
- Engineering revisions
- KDTF924PPS, KDTF924PPS0
- Appliance
- Dishwasher
- Platform
- Dishwasher platform, documentation from about 2023
- Models on this platform
- 2 across KitchenAid
- Documented fault codes
- 9 with explanations, 4 more listed
- Service documentation
- Tech sheet, service manual (used by our technicians; not published)
KitchenAid KDTF924PPS error codes
These are the fault codes documented for the platform this model belongs to. A code describes a condition the control detected; it does not by itself identify a failed part. Select a code for causes, safe checks and repair context.
| Code | Meaning | Areas involved |
|---|---|---|
| F1E1 | Control: ACU relay or triac failure | Main control board, Heating element, Circulation (wash) pump and motor |
| F1E2 | Control: MCU (motor control) failure | Main control board, Circulation (wash) pump and motor |
| F2E1 | User interface: stuck key | User interface / keypad board, Wiring harness and connectors |
| F3E1 | Thermistor/OWI: open or shorted | Temperature sensor (thermistor), Turbidity (soil) sensor, Wiring harness and connectors |
| F3E2 | OWI: failed calibration | Turbidity (soil) sensor, Wiring harness and connectors, Drain pump |
| F5E2 | Door switch: door stuck closed | Door switch, Door latch and switch, Wiring harness and connectors |
| F6E1 | User interface: no response from ACU | User interface / keypad board, Main control board, Wiring harness and connectors |
| F8E4 | Overfill / float switch open | Float and float switch, Water inlet valve, Drain pump |
| F8E5 | Inlet water: fill valve stuck open | Water inlet valve, Main control board, Flow meter |
| F1E5 | ACU Fault (explanation not yet published) | |
| F8E6 | Flow Meter Does Not Work (explanation not yet published) | |
| F9E3 | Drain Motor Failure (Variable Speed) (explanation not yet published) | |
| F9E4 | Light in the Tub Failure (explanation not yet published) |
Common dishwasher problems
Typical dishwasher repair costs
| Repair | Typical range | Labor |
|---|---|---|
| Dishwasher drain pump replacement | $180–$400 | Moderate |
| Dishwasher water inlet valve replacement | $180–$360 | Light |
| Dishwasher door latch replacement | $180–$350 | Light |
| Dishwasher door switch replacement | $180–$320 | Light |
| Dishwasher detergent dispenser replacement | $180–$370 | Moderate |
| Dishwasher thermistor or turbidity sensor replacement | $180–$330 | Light |
| Dishwasher circulation pump and wash motor replacement | $300–$620 | Heavy |
| Dishwasher heating element or drying fan replacement | $190–$410 | Moderate |
| Dishwasher diverter motor replacement | $180–$390 | Moderate |
| Dishwasher main control board replacement | $260–$590 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Repair or replace?
Dishwashers typically last about 9–12 years. Service documentation for this platform dates from about 2023, so the oldest units built on it are now around 3 years old. The age printed in the serial number, the repair cost and the condition of the rest of the appliance decide it. Use the repair-or-replace guide.
Models built on the same platform
These models share this platform's service documentation, so fault codes and most diagnostic steps are the same.
Need your KitchenAid KDTF924PPS repaired in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.