KitchenAid KDTS224SPS Dishwasher
Troubleshooting, fault codes and repair information for the KitchenAid KDTS224SPS, organized around the engineering platform this dishwasher is built on.
- Brand
- KitchenAid
- Model
- KDTS224SPS
- Engineering revisions
- KDTS224SPS0, KDTS224SPS00, KDTS224SPS1, KDTS224SPS2, KDTS224SPS3
- Appliance
- Dishwasher
- Platform
- Dishwasher platform, documentation from about 2025
- Models on this platform
- 31 across JennAir, KitchenAid, Whirlpool
- Documented fault codes
- 20 with explanations
- Service diagnostic mode
- Yes — a console-only test mode used by technicians to read stored codes and run component tests
- Service documentation
- Tech sheet, service manual (used by our technicians; not published)
Revision matters. Different engineering revisions of this model are documented on more than one platform. Confirm the full model number, including the last digit, on the model tag.
KitchenAid KDTS224SPS error codes
These are the fault codes documented for the platform this model belongs to. A code describes a condition the control detected; it does not by itself identify a failed part. Select a code for causes, safe checks and repair context.
| Code | Meaning | Areas involved |
|---|---|---|
| F1E1 | Control: ACU relay or triac failure | Main control board, Heating element, Circulation (wash) pump and motor |
| F2E1 | User interface: stuck key | User interface / keypad board, Wiring harness and connectors |
| F3E1 | Thermistor/OWI: open or shorted | Temperature sensor (thermistor), Turbidity (soil) sensor, Wiring harness and connectors |
| F3E2 | OWI: failed calibration | Turbidity (soil) sensor, Wiring harness and connectors, Drain pump |
| F4E2 | Heater: open, unplugged or failed relay | Heating element, Wiring harness and connectors, Main control board |
| F4E3 | Heater: relay shorted or heater failed | Heating element, Main control board |
| F5E1 | Door switch: door stuck open | Door latch and switch, Door switch, Wiring harness and connectors |
| F5E2 | Door switch: door stuck closed | Door switch, Door latch and switch, Wiring harness and connectors |
| F6E1 | User interface: no response from ACU | User interface / keypad board, Main control board, Wiring harness and connectors |
| F7E1 | Wash motor failure | Circulation (wash) pump and motor, Main control board, Wiring harness and connectors |
| F7E2 | Variable-speed wash motor failure | Circulation (wash) pump and motor, Main control board, Wiring harness and connectors |
| F7E4 | RIF filter plugged | Filter assembly, Circulation (wash) pump and motor |
| F8E1 | Inlet water: no water / tap closed | Water inlet valve, Float and float switch, Flow meter |
| F8E2 | Inlet water: fill valve electrical problem | Water inlet valve, Wiring harness and connectors, Main control board |
| F8E3 | Inlet water: very low water, suds or air in pump | Detergent dispenser, Diverter motor and disk, Wiring harness and connectors |
| F8E4 | Overfill / float switch open | Float and float switch, Water inlet valve, Drain pump |
| F8E5 | Inlet water: fill valve stuck open | Water inlet valve, Main control board, Flow meter |
| F9E1 | Draining: not draining | Drain pump, Filter assembly |
| F9E2 | Draining: drain motor electrical problem | Drain pump, Wiring harness and connectors, Main control board |
| F10E5 | Diverter leak detected | Diverter motor and disk, Wiring harness and connectors |
Common dishwasher problems
- Not draining
Documented check order on this platform: Water-level pressure sensing → Filters and spray arms - Not cleaning
Documented check order on this platform: Load size or distribution → Filters and spray arms → Diverter - Not filling
- Not drying
Documented check order on this platform: Dispenser - Leaking
Documented check order on this platform: Drive or pump motor → Power supply to the appliance → Exhaust vent restriction → Detergent type or amount - Not starting
Documented check order on this platform: Power supply to the appliance → Lid or door switch / lock → User interface / keypad - Lights blinking
Typical dishwasher repair costs
| Repair | Typical range | Labor |
|---|---|---|
| Dishwasher drain pump replacement | $180–$400 | Moderate |
| Dishwasher water inlet valve replacement | $180–$360 | Light |
| Dishwasher door latch replacement | $180–$350 | Light |
| Dishwasher door switch replacement | $180–$320 | Light |
| Dishwasher detergent dispenser replacement | $180–$370 | Moderate |
| Dishwasher thermistor or turbidity sensor replacement | $180–$330 | Light |
| Dishwasher circulation pump and wash motor replacement | $300–$620 | Heavy |
| Dishwasher heating element or drying fan replacement | $190–$410 | Moderate |
| Dishwasher diverter motor replacement | $180–$390 | Moderate |
| Dishwasher main control board replacement | $260–$590 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Repair or replace?
Dishwashers typically last about 9–12 years. The age printed in the serial number, the repair cost and the condition of the rest of the appliance decide it. Use the repair-or-replace guide.
Models built on the same platform
These models share this platform's service documentation, so fault codes and most diagnostic steps are the same.
- Whirlpool WDTA80SAKZ
- JennAir JDTS3924SL
- JennAir JDTS3924SM
- JennAir JDTS3924SP
- KitchenAid KDFE204KBL
- KitchenAid KDFE204KBS
- KitchenAid KDFE204KPS
- KitchenAid KDFE204KWH
- KitchenAid KDFE304RPS
- KitchenAid KDFS224SBL
- KitchenAid KDFS224SPS
- KitchenAid KDFS224SWH
- KitchenAid KDFS324SBE
- KitchenAid KDFS324SJP
- KitchenAid KDFS324SPS
- KitchenAid KDFS334SPS
- KitchenAid KDPS324SPS
- KitchenAid KDTE204KBL
- KitchenAid KDTE204KBS
- KitchenAid KDTE204KPS
- KitchenAid KDTE204KWH
- KitchenAid KDTE304LPA
- KitchenAid KDTE304RBS
- KitchenAid KDTE304RP
- KitchenAid KDTE304RPS
- KitchenAid KDTS324SBE
- KitchenAid KDTS324SBL
- KitchenAid KDTS324SJP
- KitchenAid KDTS324SPS
- KitchenAid KDTS324SWH
Need your KitchenAid KDTS224SPS repaired in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.