Maytag range F1E0 error code
F1E0 does not mean the same thing on every Maytag range. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Maytag models |
|---|---|---|
| Internal control board failure | Ranges | 102 |
| EEPROM communication error | Ranges | 32 |
F1E0: Internal control board failure
- Brand
- Maytag
- Appliance
- Electric range, Gas range
- Code
- F1E0
- Documented meaning
- Internal control board failure
- Applies to
- 102 Maytag models on 14 platforms
- Can you keep using it?
- With caution
F1E0 means the oven's main electronic control failed one of its own internal self-checks, so it cannot be trusted to run the oven.
What the range is detecting
The main control continuously tests its own circuitry. On these controls F1E0 is reported when that self-test fails; the documentation groups it with the F1E1 and F1E2 internal (A/D) errors and handles them the same way.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented An internal fault in the main oven control board.
- Possible A brief power disturbance that upset the control; a reset can show whether the fault is permanent.
Safe checks you can make
- Switch the oven off at the circuit breaker (or unplug it if the plug is easy to reach) for about one minute, restore power, and see whether the code comes back.
- Write down the full code exactly as shown (including any number after a dash) and when it appears; it speeds up diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Confirms the code in the service diagnostic menu and checks whether other codes are stored with it.
- Checks supply power and the connections at the control before condemning the board.
- Decides from the platform documentation whether the main control or the display board is the part at fault.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Range control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The control may lock out some or all cooking functions. A power reset may clear the code for a while; if it keeps coming back, the control system needs diagnosis rather than repeated resets.
Maytag models documented with this code
- MER4600LS
- MER6600FB
- MER6600FS
- MER6600FW
- MER6600FZ
- MER7685BB
- MER7685BS
- MER7685BW
- MER7700LZ
- MER8600DE
- MER8600DH
- MER8600DS
- MER8650DE
- MER8650DH
- MER8650DS
- MER8650ES
And 86 more. Use the model lookup to check yours.
F1E0: EEPROM communication error
- Brand
- Maytag
- Appliance
- Electric range, Gas range
- Code
- F1E0
- Documented meaning
- EEPROM communication error
- Applies to
- 32 Maytag models on 4 platforms
- Can you keep using it?
- With caution
F1E0 means the main control stopped talking to its own memory (EEPROM) and locked up after an unexpected communication event.
What the range is detecting
The control stores settings and calibration in a memory chip and checks every exchange with it. When an exchange fails, the control locks up and stores F1E0. The documentation notes that a power reset often clears it.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A one-time communication glitch inside the control, which a power reset may clear.
- Documented A main control board that keeps losing contact with its memory, shown by the code returning after a reset.
Safe checks you can make
- Switch the oven off at the breaker (or unplug it) for at least 30 seconds, restore power and wait about two minutes to see whether F1E0 returns.
- Write down the full code exactly as shown (including any number after a dash) and when it appears; it speeds up diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Confirms whether the code returns after a full power reset.
- Reviews the stored fault history for related codes.
- Replaces the main control only when the code persists after a reset.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Range control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The control may lock out some or all cooking functions. A power reset may clear the code for a while; if it keeps coming back, the control system needs diagnosis rather than repeated resets.
Maytag models documented with this code
- MER8800DE
- MER8800DH
- MER8800DS
- MER8800FB
- MER8800FW
- MER8800HK
- MGR8800DE
- MGR8800DH
- MGR8800DS
- MGR8800FB
- MGR8800FE
- MGR8800FH
- MGR8800FW
- MGR8800HK
- MGR8850DS
- MGS8800PZ
And 16 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a range. Most F1E0 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F1E0 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.