Maytag MER8800HK Electric range
Troubleshooting, fault codes and repair information for the Maytag MER8800HK, organized around the engineering platform this electric range is built on.
- Brand
- Maytag
- Model
- MER8800HK
- Engineering revisions
- MER8800HK0
- Appliance
- Electric range
- Platform
- Electric range platform, documentation from about 2014
- Models on this platform
- 14 across Maytag
- Documented fault codes
- 21 with explanations
- Service diagnostic mode
- Yes — a console-only test mode used by technicians to read stored codes and run component tests
- Service documentation
- Tech sheet, service manual (used by our technicians; not published)
Maytag MER8800HK error codes
These are the fault codes documented for the platform this model belongs to. A code describes a condition the control detected; it does not by itself identify a failed part. Select a code for causes, safe checks and repair context.
| Code | Meaning | Areas involved |
|---|---|---|
| F1E0 | EEPROM communication error | Main control board |
| F1E5 | Sensor value out of range | Main control board |
| F1E7 | Control board temperature sensor fault | Main control board, Cooling fan |
| F1E9 | Data bus queue full | Main control board, Wiring harness and connectors |
| F2E0 | Keypad disconnected | User interface / keypad board, Wiring harness and connectors |
| F2E1 | Stuck or shorted key | User interface / keypad board, Wiring harness and connectors |
| F2E2 | Cancel/Off key error | User interface / keypad board |
| F3E0 | Oven temperature sensor open or shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E1 | Oven sensor shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E2 | Warming drawer sensor open or shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E3 | Self-clean over temperature | Oven temperature sensor, Oven door lock motor and latch, Main control board |
| F5E0 | Door and lock switches do not agree | Oven door lock motor and latch, Wiring harness and connectors, Main control board |
| F5E2 | Door position switches do not agree | Oven door lock motor and latch, Wiring harness and connectors |
| F6E0 | Lost communication with user interface | Wiring harness and connectors, User interface / keypad board, Main control board |
| F6E1 | Oven over temperature | Oven temperature sensor, Relay / power board, Bake element |
| F6E2 | Self-clean over temperature | Oven temperature sensor, Relay / power board, Main control board |
| F6E3 | Warming drawer over temperature | Oven temperature sensor, Relay / power board |
| F6E4 | Panel and control out of sync | Wiring harness and connectors, Relay / power board, User interface / keypad board |
| F8E0 | Cooling fan too slow | Cooling fan, Wiring harness and connectors, Main control board |
| F8E2 | Cooling fan too fast | Cooling fan, Wiring harness and connectors |
| F9E0 | Power supply miswired | Wiring harness and connectors, Main control board |
Common range problems
Typical range repair costs
| Repair | Typical range | Labor |
|---|---|---|
| Oven bake or broil element replacement | $180–$420 | Light |
| Range surface element and switch replacement | $180–$440 | Light |
| Range glass cooktop replacement | $350–$940 | Moderate |
| Oven temperature sensor replacement | $180–$320 | Light |
| Oven door lock motor and latch replacement | $220–$470 | Moderate |
| Oven convection fan replacement | $220–$470 | Moderate |
| Range control board replacement | $300–$720 | Moderate |
| Range touchpad / user interface replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Repair or replace?
Ranges typically last about 13–17 years. Service documentation for this platform dates from about 2014, so the oldest units built on it are now around 12 years old. The age printed in the serial number, the repair cost and the condition of the rest of the appliance decide it. Use the repair-or-replace guide.
Models built on the same platform
These models share this platform's service documentation, so fault codes and most diagnostic steps are the same.
- Maytag MER8800DE
- Maytag MER8800DH
- Maytag MER8800DS
- Maytag MER8800FB
- Maytag MER8800FW
- Maytag MER8800FZ
- Maytag YMER8800DE
- Maytag YMER8800DH
- Maytag YMER8800DS
- Maytag YMER8800FB
- Maytag YMER8800FW
- Maytag YMER8800FZ
- Maytag YMER8800HK
Need your Maytag MER8800HK repaired in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.