Maytag range F6E2: self-clean over temperature
F6E2 means the control measured an oven temperature above the self-clean limit (documented as about 900°F on several platforms) and locked out cooking and cleaning in that cavity.
What F6E2 means
- Brand
- Maytag
- Appliance
- Electric range, Gas range
- Code
- F6E2
- Documented meaning
- Self-clean over temperature
- Applies to
- 27 Maytag models on 2 platforms
- Can you keep using it?
- No — stop and have it checked
What the range is detecting
During self-clean the control enforces a higher ceiling than for cooking. A reading above it shuts off heat and locks out the cavity until it cools down. A false reading or real overheating can cause it.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A heating circuit that stays powered when it should be off.
- Documented An oven sensor or its wiring reading falsely high.
- Documented A control board fault in the sensor input.
Safe checks you can make
- If you smell gas at any point, do not touch switches or controls; leave the home and call your gas utility or 911 from outside.
- If the code appeared during or after a self-clean, press Cancel or Off, let the oven cool for at least an hour, and never force a locked door open.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- Compares the actual cavity temperature with the control's reading to separate a false reading from real overheating.
- Checks the oven sensor and its wiring.
- This requires professional testing: finding a heating circuit that stays powered means working on live line-voltage circuits.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Oven temperature sensor replacement | $180–$320 | Light |
| Range control board replacement | $300–$720 | Moderate |
| Oven door lock motor and latch replacement | $220–$470 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Stop using it until it is checked. Turn the oven off and do not use it until it is checked. If it keeps heating with no cook function selected, switch the circuit breaker off. On a gas range, if you smell gas, leave the home and call the gas utility.
Maytag models documented with this code
- MER8800DE
- MER8800DH
- MER8800DS
- MER8800FB
- MER8800FW
- MER8800HK
- MGR8800DE
- MGR8800DH
- MGR8800DS
- MGR8800FB
- MGR8800FE
- MGR8800FH
- MGR8800FW
- MGR8800HK
- MGR8850DS
- YMER8800DE
And 11 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a range. Most F6E2 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 13–17-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F6E2 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.