Whirlpool WFE515C0BB Electric range
Troubleshooting, fault codes and repair information for the Whirlpool WFE515C0BB, organized around the engineering platform this electric range is built on.
- Brand
- Whirlpool
- Model
- WFE515C0BB
- Engineering revisions
- WFE515C0BB0
- Appliance
- Electric range
- Platform
- Electric range platform, documentation from about 2013
- Models on this platform
- 3 across Whirlpool
- Documented fault codes
- 12 with explanations
- Service documentation
- Tech sheet (used by our technicians; not published)
Whirlpool WFE515C0BB error codes
These are the fault codes documented for the platform this model belongs to. A code describes a condition the control detected; it does not by itself identify a failed part. Select a code for causes, safe checks and repair context.
| Code | Meaning | Areas involved |
|---|---|---|
| F1E0 | Internal control board failure | Main control board |
| F1E1 | Control internal error (A/D) | Main control board |
| F1E2 | Control internal error (A/D) | Main control board |
| F2E0 | Shorted key | User interface / keypad board, Main control board |
| F3E0 | Oven temperature sensor open or shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E1 | Oven sensor shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E2 | Bake/broil over temperature | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E3 | Self-clean over temperature | Oven temperature sensor, Oven door lock motor and latch, Main control board |
| F5E0 | Door and lock switches do not agree | Oven door lock motor and latch, Wiring harness and connectors, Main control board |
| F5E1 | Door latch not operating | Oven door lock motor and latch, Wiring harness and connectors, Main control board |
| F5E2 | Door position switches do not agree | Oven door lock motor and latch, Wiring harness and connectors |
| F9E0 | Power supply miswired | Wiring harness and connectors, Main control board |
Common range problems
Typical range repair costs
| Repair | Typical range | Labor |
|---|---|---|
| Oven bake or broil element replacement | $180–$420 | Light |
| Range surface element and switch replacement | $180–$440 | Light |
| Range glass cooktop replacement | $350–$940 | Moderate |
| Oven temperature sensor replacement | $180–$320 | Light |
| Oven door lock motor and latch replacement | $220–$470 | Moderate |
| Oven convection fan replacement | $220–$470 | Moderate |
| Range control board replacement | $300–$720 | Moderate |
| Range touchpad / user interface replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Repair or replace?
Ranges typically last about 13–17 years. Service documentation for this platform dates from about 2013, so the oldest units built on it are now around 13 years old. The age printed in the serial number, the repair cost and the condition of the rest of the appliance decide it. Use the repair-or-replace guide.
Models built on the same platform
These models share this platform's service documentation, so fault codes and most diagnostic steps are the same.
Need your Whirlpool WFE515C0BB repaired in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.