KitchenAid KFGD500ESS010 Gas range
Troubleshooting, fault codes and repair information for the KitchenAid KFGD500ESS010, organized around the engineering platform this gas range is built on.
- Brand
- KitchenAid
- Model
- KFGD500ESS010
- Engineering revisions
- KFGD500ESS010
- Appliance
- Gas range
- Platform
- Gas range platform, documentation from about 2021
- Models on this platform
- 1 across KitchenAid
- Documented fault codes
- 16 with explanations, 1 more listed
- Service documentation
- Tech sheet (used by our technicians; not published)
KitchenAid KFGD500ESS010 error codes
These are the fault codes documented for the platform this model belongs to. A code describes a condition the control detected; it does not by itself identify a failed part. Select a code for causes, safe checks and repair context.
| Code | Meaning | Areas involved |
|---|---|---|
| F1E0 | EEPROM communication error | Main control board |
| F1E1 | Upper oven sensor input uncalibrated | Main control board |
| F1E2 | Lower oven sensor input uncalibrated | Main control board |
| F1E5 | Sensor value out of range | Main control board |
| F1E7 | Control board temperature sensor fault | Main control board, Cooling fan |
| F1E9 | Data bus queue full | Main control board, Wiring harness and connectors |
| F2E0 | Keypad disconnected | User interface / keypad board, Wiring harness and connectors |
| F2E1 | Stuck or shorted key | User interface / keypad board, Wiring harness and connectors |
| F2E2 | Cancel/Off key error | User interface / keypad board |
| F3E0 | Oven temperature sensor open or shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F3E1 | Second oven sensor open or shorted | Oven temperature sensor, Wiring harness and connectors, Main control board |
| F5E0 | Door and lock switches do not agree | Oven door lock motor and latch, Wiring harness and connectors, Main control board |
| F5E1 | Door latch not operating | Oven door lock motor and latch, Wiring harness and connectors, Main control board |
| F6E1 | Oven over temperature | Oven temperature sensor, Relay / power board, Bake element |
| F6E2 | Self-clean over temperature | Oven temperature sensor, Relay / power board, Main control board |
| F9E0 | Power supply miswired | Wiring harness and connectors, Main control board |
| F6E0 | Lost WIDE Communication (explanation not yet published) |
Common range problems
- Oven not heating
- Temperature inaccurate
- Burner won't light
- Door locked
- Igniter keeps clicking
- Controls not responding
Typical range repair costs
| Repair | Typical range | Labor |
|---|---|---|
| Gas oven igniter replacement | $190–$410 | Light |
| Gas range oven safety valve or burner valve replacement | $250–$570 | Moderate |
| Range surface burner spark ignition repair | $180–$370 | Light |
| Oven temperature sensor replacement | $180–$320 | Light |
| Oven door lock motor and latch replacement | $220–$470 | Moderate |
| Oven convection fan replacement | $220–$470 | Moderate |
| Range control board replacement | $300–$720 | Moderate |
| Range touchpad / user interface replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Repair or replace?
Ranges typically last about 13–17 years. Service documentation for this platform dates from about 2021, so the oldest units built on it are now around 5 years old. The age printed in the serial number, the repair cost and the condition of the rest of the appliance decide it. Use the repair-or-replace guide.
Need your KitchenAid KFGD500ESS010 repaired in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.