Roper washer F5E3: lid will not unlock
F5E3 means the washer tried to release the lid lock but could not confirm it reached the unlocked position.
What F5E3 means
- Brand
- Roper
- Appliance
- Top-load washer
- Code
- F5E3
- Documented meaning
- Lid will not unlock
- Applies to
- 9 Roper models on 5 platforms
- Can you keep using it?
- With caution
What the washer is detecting
At the end of a cycle the control retracts the lock bolt. If it cannot confirm the unlocked position, it stores F5E3 and the lid stays locked.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented Pressure on the lid holding the lock bolt so it cannot retract.
- Documented Detergent or lint buildup that stops the bolt from moving.
- Documented The control unable to read the lock's position.
Safe checks you can make
- Make sure nothing is resting on the lid, then unplug the washer for one minute and plug it back in to let the lock try again.
- Do not pry the lid open; forcing it can break the lock or the strike.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the lid lock test.
- Checks the lock mechanism and wiring.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Top-load washer lid lock replacement | $180–$370 | Light |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. If the lid stays locked with clothes inside, unplug the washer and have the lock serviced rather than forcing it.
Roper models documented with this code
And 2 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Roper platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F5E3 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F5E3 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.