Roper washer support & repair
Troubleshooting, error codes and repair costs for Roper washers. Our data covers 23 Roper washer models across 13 engineering platforms.
Common Roper washer problems
Washer not draining
A washer that won't drain is first checked for something blocking the water's path: a kinked or badly installed drain…
Washer not spinning
A washer that won't spin is either being told not to spin by a safety or load check, or it cannot turn the basket…
Washer not filling with water
A washer that won't fill is first checked at the supply: both faucets fully open, hoses not kinked, and the small…
Washer not agitating or washing
A top-load washer that fills but won't agitate is often working as designed: impeller models move the load gently with…
Washer leaking water
Where the water appears is the best clue to a washer leak. Water at the back points to the fill hoses or the drain…
Washer won't start
A washer that won't start either has no power, has a feature turned on that blocks starting, or cannot confirm that…
Washer shaking, walking or making noise
Washer shaking is checked first at installation and loading: shipping bolts left in a new front-loader, a washer not…
Washer door or lid stuck locked
A washer keeps the lid or door locked whenever it thinks there is water in the tub, the drum is still turning, or the…
Washer stops mid-cycle
A washer that stops mid-cycle has hit a condition it cannot get past: water not leaving fast enough, a fill that takes…
Washer smells bad
A washer that smells musty or sour has residue and moisture left inside: detergent and softener buildup, a damp door…
Roper washer error codes
| Code | Meaning | Models |
|---|---|---|
| F0E2 | Too many suds | 9 |
| F0E4 | Rinse water too hot | 9 |
| F0E5 | Off-balance load | 9 |
| F1E1 | Main control fault | 9 |
| F1E2 | Motor control fault | 9 |
| F2E1 | Stuck button | 9 |
| F2E3 | Control and console mismatch / Console switch mismatch (varies by model) | 9 |
| F3E1 | Pressure system fault | 9 |
| F3E2 | Inlet water temperature sensor fault | 9 |
| F5E1 | Lid switch fault | 9 |
| F5E2 | Lid will not lock | 9 |
| F5E3 | Lid will not unlock | 9 |
| F5E4 | Lid not opened between cycles | 9 |
| F7E1 | Basket speed sensing fault | 9 |
| F7E5 | Shifter fault | 9 |
| F7E6 | Motor circuit open | 9 |
| F7E7 | Motor unable to reach target speed | 9 |
| F8E1 | No fill or long fill | 9 |
| F8E3 | Overflow | 9 |
| F8E5 | Hot and cold reversed | 9 |
| F9E1 | Long drain | 9 |
How Roper washers are organized
Models are grouped by engineering platform: models on the same platform share their service documentation, fault-code list and most diagnostic steps, even when they carry different brand names. That is why we ask for the model number when you have it.
| Type | Docs from | Models | Codes | Examples |
|---|---|---|---|---|
| Top-load washer | 2008 | 3 | 0 | RTW4200SQ, RTW4300SQ, RTW4340SQ |
| Top-load washer | 2019 | 2 | 21 | RTW3005TW, RTW4519PW |
| Top-load washer | 2016 | 2 | 36 | RTW4516FW, RTW4645EW |
| Top-load washer | 2013 | 2 | 21 | RTW4641BQ, RTW4740YQ |
| Top-load washer | 2010 | 2 | 21 | RTW4305XQ, RTW4440XQ |
| Top-load washer | 2008 | 2 | 0 | RTW4100WQ, RTW4200WQ |
| Top-load washer | 2008 | 2 | 0 | RTW4300TQ, RTW4305SQ |
| Top-load washer | 2008 | 2 | 0 | RTW4305VQ, RTW4440VQ |
| Top-load washer | 2006 | 2 | 0 | RTW4100SQ, RTW4240SQ |
| Top-load washer | 2011 | 1 | 21 | RTW4640YQ |
Roper washer repair costs
| Repair | Typical range | Labor |
|---|---|---|
| Washer drain pump replacement | $180–$420 | Moderate |
| Washer water inlet valve replacement | $180–$360 | Light |
| Washer water-level pressure sensor repair | $180–$350 | Light |
| Top-load washer lid lock replacement | $180–$370 | Light |
| Front-load washer door lock replacement | $180–$400 | Moderate |
| Washer drive belt replacement | $180–$330 | Light |
| Washer suspension rods, springs or dampers replacement | $180–$440 | Moderate |
| Washer detergent dispenser repair | $180–$350 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Repair or replace?
Washers typically last 10–13 years. Use the repair-or-replace guide to weigh age, repair cost and condition.
Roper washer models
A selection of models with the most complete data. Use the lookup above for any model.
Roper washer repair in Las Vegas
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.