Serving Las Vegas, Henderson, Summerlin, Boulder City(725) 900-0963
Menu
TroubleshootingError CodesRepair CostsRepair or ReplaceBrandsSchedule Appliance RepairCall (725) 900-0963
Error code

Roper washer F2E1: stuck button

F2E1 means the console reports a button that stays pressed far longer than anyone would hold it.

What F2E1 means

Brand
Roper
Appliance
Top-load washer
Code
F2E1
Documented meaning
Stuck button
Applies to
9 Roper models on 5 platforms
Can you keep using it?
With caution

What the washer is detecting

The console board watches every key. If one reads as continuously pressed for an extended time, the control assumes a stuck or shorted key and stores F2E1.

Causes listed for this condition

In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.

  1. Documented A key or keypad membrane on the console that is stuck or shorted.
  2. Possible Something resting on the control panel, or moisture or residue under a button.

Safe checks you can make

  • Make sure nothing is leaning on the control panel, then press each button once to feel whether any is sticking.
  • Wipe the panel with a damp, well-wrung cloth to remove spilled detergent, then dry it.
  • Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.

Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.

What a technician checks

  • Runs the console key test in service diagnostics to find which key reads as pressed.
  • Checks the console board and its connection to the main control.

Typical repairs and cost

Depending on what diagnosis finds, this code can lead to one of these repairs:

RepairTypical rangeLabor
Washer user interface / keypad replacement$250–$550Light

Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.

Can you keep using it?

Use with caution. The washer may ignore some buttons or start unexpectedly. Use it only if the console responds normally after a reset.

Roper models documented with this code

And 2 more. Use the model lookup to check yours.

Other codes documented on the same Roper platforms:

Repair or replace?

A fault code alone rarely justifies replacing a washer. Most F2E1 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.

Need F2E1 diagnosed in the Las Vegas area?

We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.

Schedule Appliance Repair Call (725) 900-0963
Schedule Call (725) 900-0963