Maytag washer F2E3 error code
F2E3 does not mean the same thing on every Maytag washer. Our data shows 4 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Maytag models |
|---|---|---|
| Control and console mismatch | Top-load washer | 62 |
| Unsupported cycle | Front-load washer | 7 |
| Console switch mismatch | Top-load washer | 7 |
| Control and console mismatch | Front-load washer | 3 |
F2E3: Control and console mismatch
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F2E3
- Documented meaning
- Control and console mismatch
- Applies to
- 62 Maytag models on 12 platforms
- Can you keep using it?
- With caution
F2E3 means the main control and the console (user interface) board do not identify as a matching pair for this model.
What the washer is detecting
The main control checks the identification the console reports. If it does not match the expected value, F2E3 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A main control or console that is the wrong part number for this model.
- Possible A recent board replacement with an incorrect part.
Safe checks you can make
- If a board was replaced recently, mention it to the technician.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Verifies both board part numbers against the model's parts list.
- Runs the main control and console tests.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
| Washer user interface / keypad replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. Cycles and options may not work correctly until the correct boards are installed.
Maytag models documented with this code
- MTW4200SW
- MTW4205SW
- MVW18CSAWW
- MVW18CSBWW
- MVW18MNAWW
- MVW18MNBWW
- MVW18PDAGW
- MVW18PDBGW
- MVW576KW
- MVWB755DW
- MVWB757JW
- MVWB765FC
- MVWB765FW
- MVWB766FW
- MVWB835DC
- MVWB835DW
And 46 more. Use the model lookup to check yours.
F2E3: Unsupported cycle
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F2E3
- Documented meaning
- Unsupported cycle
- Applies to
- 7 Maytag models on 4 platforms
- Can you keep using it?
- With caution
F2E3 means the control was asked to run a cycle it does not recognize for this model, which points at corrupted cycle data or a board that does not match the washer.
What the washer is detecting
The main control holds the cycle definitions for the model. If the console requests a cycle the control cannot match, or the stored cycle data is damaged, it reports F2E3.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented An intermittent connection between the console and the main control.
- Documented Corrupted cycle data in the main control.
- Documented A main control or console board that is not the correct part for this model.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
- Turn the cycle knob through every position and note whether the display shows the expected cycle names.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks the harness between the console and the main control.
- Verifies that the installed boards are the correct parts for the model.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
| Washer user interface / keypad replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. Some cycles may not run correctly. Have the boards checked if the code repeats.
Maytag models documented with this code
F2E3: Console switch mismatch
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F2E3
- Documented meaning
- Console switch mismatch
- Applies to
- 7 Maytag models on 2 platforms
- Can you keep using it?
- With caution
F2E3 means the switches the control reads on the console do not match the console it expects, or are not working correctly.
What the washer is detecting
During diagnostic checks the control compares the console switches it detects with the configuration for this model. A mismatch or a misbehaving switch sets F2E3.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A console with switches that do not match this model, or switches that are not operating correctly.
Safe checks you can make
- Turn each knob and press each button through its positions to see whether any feels loose or does not click.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the console and indicator test in service diagnostics.
- Confirms the console part number for the model.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer user interface / keypad replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. Some selections may not register correctly. Have the console checked if settings do not take.
Maytag models documented with this code
And 3 more. Use the model lookup to check yours.
F2E3: Control and console mismatch
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F2E3
- Documented meaning
- Control and console mismatch
- Applies to
- 3 Maytag models on 1 platform
- Can you keep using it?
- With caution
F2E3 means the main control and the console board do not match each other for this model.
What the washer is detecting
At power-up the main control and the console identify themselves. If their configurations are not meant to work together, the control reports F2E3. It is often seen after a replacement board.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Possible A replacement main control or console board that is not the correct part for this model.
- Possible A console board configured for a different model.
Safe checks you can make
- If a control or console board was replaced recently, tell the technician which part was installed.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Verifies that the main control and console part numbers are correct for the model.
- Checks the configuration of the installed boards.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
| Washer user interface / keypad replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The washer may not offer the correct cycles or may not run. Have the boards verified.
Maytag models documented with this code
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F2E3 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F2E3 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.