Maytag washer F1E1 error code
F1E1 does not mean the same thing on every Maytag washer. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Maytag models |
|---|---|---|
| Main control fault | Top-load washer | 105 |
| Main control fault | Front-load washer | 54 |
F1E1: Main control fault
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F1E1
- Documented meaning
- Main control fault
- Applies to
- 105 Maytag models on 20 platforms
- Can you keep using it?
- With caution
F1E1 means the main control board detected a problem with its own operation.
What the washer is detecting
The main control runs internal self-checks on its memory and circuits. When one of those checks fails, it stores F1E1. The documentation points straight to the main control test.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented An internal fault in the main control board.
- Possible A power disturbance such as a surge or brief outage that upset the control.
Safe checks you can make
- Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.
- Plug the washer directly into a grounded wall outlet rather than an extension cord or power strip.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the main control self-test in service diagnostics.
- Confirms supply power and connections to the control before condemning it.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. If the code cleared after a power reset and the washer runs normally, keep using it and watch for a repeat. If it returns, have the control diagnosed.
Maytag models documented with this code
- MTW4200SW
- MTW4205SW
- MTW5205TW
- MTW5600RU
- MTW5600RW
- MTW5605RU
- MTW5605RW
- MTW6200RF
- MTW6200RR
- MTW6200RW
- MTW6205RF
- MTW6205RR
- MTW6205RW
- MTW7200RF
- MTW7200RR
- MTW7200RW
And 89 more. Use the model lookup to check yours.
F1E1: Main control fault
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F1E1
- Documented meaning
- Main control fault
- Applies to
- 54 Maytag models on 10 platforms
- Can you keep using it?
- With caution
F1E1 means the main control's own self-check found an internal problem, such as corrupted memory or a fault in its power or relay circuits.
What the washer is detecting
The appliance control unit checks its memory and key internal circuits. When a check fails, it stores F1E1. A brief power disturbance can trigger it once; a code that keeps coming back points at the control or its power supply.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A power surge, a brief outage or a poor connection at the outlet.
- Documented An internal failure of the main control (memory or relay circuits).
- Possible A problem with the household circuit feeding the washer.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
- Look at the outlet and plug: a scorched, loose or damaged outlet must be repaired by an electrician before the washer is used.
- Make sure the washer is plugged straight into a wall outlet, not an extension cord or power strip.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- Checks the supply circuit and the power feeding the main control.
- Runs the control's power check to decide whether the main control itself has failed. Testing a live supply requires professional testing because line voltage is present.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. If the code cleared after a power reset and does not return, the washer can be used. If it returns, stop and have it diagnosed.
Maytag models documented with this code
- MFW7020RF
- MFW7020RU
- MFW7020RW
- MHW3100DW
- MHW3500BW
- MHW3500FW
- MHW3505FW
- MHW4100DW
- MHW4300DC
- MHW4300DW
- MHW5100DC
- MHW5100DW
- MHW5400DC
- MHW5400DW
- MHW5500FC
- MHW5500FW
And 38 more. Use the model lookup to check yours.
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F1E1 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F1E1 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.