Maytag washer F3E6 error code
F3E6 does not mean the same thing on every Maytag washer. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Maytag models |
|---|---|---|
| Accelerometer fault | Front-load washer | 8 |
| Rotor position sensor | Front-load washer | 3 |
F3E6: Accelerometer fault
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F3E6
- Documented meaning
- Accelerometer fault
- Applies to
- 8 Maytag models on 1 platform
- Can you keep using it?
- With caution
F3E6 means the motion sensor (accelerometer) on the main control failed its self-test or reported an impossible orientation.
What the washer is detecting
The main control carries an accelerometer that senses drum movement for balance and spin control. When it fails its self-check, the control reports F3E6.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A failed accelerometer on the main control.
- Possible A main control that is loose or mounted out of position.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Confirms the fault in service diagnostics.
- Checks the main control mounting and power before replacing anything.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. Spin and balance control may not work correctly. Have the control checked.
Maytag models documented with this code
F3E6: Rotor position sensor
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F3E6
- Documented meaning
- Rotor position sensor
- Applies to
- 3 Maytag models on 1 platform
- Can you keep using it?
- With caution
F3E6 on this platform means the control has a problem with the sensor that reports the motor rotor position.
What the washer is detecting
The motor control needs to know where the rotor is in order to drive the motor smoothly. F3E6 is stored when that position signal is missing or invalid.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Possible A failed rotor position sensor at the motor.
- Possible A loose or damaged motor connection.
- Possible A motor control fault.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks the motor connections and wiring.
- Runs the motor circuit tests to find the faulty part.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer drive motor replacement | $300–$720 | Heavy |
| Washer motor control board replacement | $280–$600 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The drum may not turn or spin reliably. Have the drive system checked.
Maytag models documented with this code
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F3E6 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F3E6 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.