Maytag washer F0E7 error code
F0E7 does not mean the same thing on every Maytag washer. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Maytag models |
|---|---|---|
| Load detected during Clean Washer cycle | Top-load washer | 38 |
| Clothes detected during Clean Washer cycle | Front-load washer | 3 |
F0E7: Load detected during Clean Washer cycle
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F0E7
- Documented meaning
- Load detected during Clean Washer cycle
- Applies to
- 38 Maytag models on 7 platforms
- Can you keep using it?
- Generally yes
F0E7 means the washer sensed laundry in the basket after the Clean Washer cycle was selected, so it stopped.
What the washer is detecting
The cleaning cycle uses very hot water and strong cleaner and must run empty. The control senses load weight at the start; if it finds a load, it stores F0E7.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented Clothing or other items left in the basket.
- Documented Drag on the drive or basket that the control mistakes for a load.
Safe checks you can make
- Empty the basket completely, including small items stuck under the agitator or wash plate, and restart Clean Washer.
- With the washer unplugged and the basket empty, look and feel around the top edge of the basket and the wash plate for a sock, sheet corner or other item caught between the basket and the outer tub.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks for drag in the drive or basket if the code appears with an empty basket.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Top-load washer gearcase / transmission replacement | $400–$880 | Major |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Generally safe to keep using. Normal wash cycles are not affected. Remove the load and run the cleaning cycle empty.
Maytag models documented with this code
- MTW4200SW
- MTW4205SW
- MTW5205TW
- MTW5600RU
- MTW5600RW
- MTW5605RU
- MTW5605RW
- MTW6200RF
- MTW6200RR
- MTW6200RW
- MTW6205RF
- MTW6205RR
- MTW6205RW
- MTW7200RF
- MTW7200RR
- MTW7200RW
And 22 more. Use the model lookup to check yours.
F0E7: Clothes detected during Clean Washer cycle
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F0E7
- Documented meaning
- Clothes detected during Clean Washer cycle
- Applies to
- 3 Maytag models on 1 platform
- Can you keep using it?
- Generally yes
F0E7 means the washer detected clothes in the drum during the Clean Washer cycle, which has to run with the drum empty.
What the washer is detecting
The control checks the drum for a load at the start of the cleaning cycle and stops it if it finds one.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented Items left in the drum or caught in the door seal when the cleaning cycle was started.
Safe checks you can make
- Remove everything from the drum, including socks in the folds of the door seal, and restart the Clean Washer cycle.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks for drag on the drum if the code returns with the drum empty.
Can you keep using it?
Generally safe to keep using. A usage message. Empty the drum and run the cycle again.
Maytag models documented with this code
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F0E7 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F0E7 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.