Maytag washer F0E6 error code
F0E6 does not mean the same thing on every Maytag washer. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Maytag models |
|---|---|---|
| Motion sensor orientation | Top-load washer | 13 |
| Displacement sensor not detected | Front-load washer | 3 |
F0E6: Motion sensor orientation
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F0E6
- Documented meaning
- Motion sensor orientation
- Applies to
- 13 Maytag models on 1 platform
- Can you keep using it?
- With caution
F0E6 means the motion sensor mounted on the tub reported that it is not level, so the control cannot trust its vibration readings.
What the washer is detecting
On these models a small accelerometer on the tub reports tub movement for off-balance detection. If the sensor reports an orientation outside what it expects, for example because it has come loose, F0E6 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented The motion sensor not properly attached to the tub.
- Possible The washer itself badly out of level.
Safe checks you can make
- Check that the washer stands level and steady on all four feet.
- Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks that the motion sensor is mounted securely on the tub.
- Reviews the sensor reading in service diagnostics.
Can you keep using it?
Use with caution. Off-balance protection may not work correctly, so avoid large or heavy loads until it is checked.
Maytag models documented with this code
F0E6: Displacement sensor not detected
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F0E6
- Documented meaning
- Displacement sensor not detected
- Applies to
- 3 Maytag models on 1 platform
- Can you keep using it?
- With caution
F0E6 means the main control does not detect the displacement measurement sensor (DMS) it expects to find.
What the washer is detecting
On this platform a displacement measurement sensor reports tub movement to the control. F0E6 is stored when the control finds no sensor attached at all, which points at the connection or the sensor itself.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Possible A disconnected or damaged sensor connection.
- Possible A failed displacement measurement sensor.
- Possible A main control that cannot read the sensor.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Confirms whether the sensor is present and connected.
- Checks the wiring between the sensor and the main control.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The washer may refuse to spin or run normally. Have it checked rather than repeatedly restarting.
Maytag models documented with this code
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F0E6 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F0E6 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.