Maytag washer F3E2-1: pressure sensor reading out of range
F3E2-1 means the water-level pressure sensor is reporting a reading outside its valid range.
What F3E2-1 means
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F3E2-1
- Documented meaning
- Pressure sensor reading out of range
- Applies to
- 13 Maytag models on 1 platform
- Can you keep using it?
- No — stop and have it checked
What the washer is detecting
This is a more specific sub-code of the pressure system fault: the sensor itself is responding, but its reading is out of range, so the control cannot judge the water level.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A pinched, kinked, plugged or leaking pressure hose from the tub.
- Documented A fault in the pressure sensor or its circuit.
Safe checks you can make
- Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Inspects the pressure hose and its connections.
- Runs the water-level test in service diagnostics.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer water-level pressure sensor repair | $180–$350 | Light |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Stop using it until it is checked. Do not keep running the washer until the level sensing is fixed; it cannot fill or drain reliably.
Maytag models documented with this code
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F3E2-1 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F3E2-1 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.