Maytag washer F6E2 error code
F6E2 does not mean the same thing on every Maytag washer. Our data shows 4 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Maytag models |
|---|---|---|
| Console and main control communication | Front-load washer | 34 |
| Console not receiving from control | Top-load washer | 27 |
| Main control not receiving from motor control | Top-load washer | 13 |
| Main control cannot hear motor control | Front-load washer | 3 |
F6E2: Console and main control communication
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F6E2
- Documented meaning
- Console and main control communication
- Applies to
- 34 Maytag models on 3 platforms
- Can you keep using it?
- With caution
F6E2 on these platforms means the console (user interface) and the main control are not communicating.
What the washer is detecting
The console sends your selections to the main control and receives status back. F6E2 is stored when that link fails.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose or damaged cable between the console and the main control.
- Documented A fault on the console board.
- Documented A main control without power or with a fault.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks the cable between the console and the main control.
- Checks power to the main control and runs the console test.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer user interface / keypad replacement | $250–$550 | Light |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The washer may not respond to buttons. Have it checked if the code repeats.
Maytag models documented with this code
- MHW3100DW
- MHW3500FW
- MHW3505FW
- MHW4100DW
- MHW4300DC
- MHW4300DW
- MHW5100DC
- MHW5100DW
- MHW5400DC
- MHW5400DW
- MHW5500FC
- MHW5500FW
- MHW5630HC
- MHW5630HW
- MHW5630MBK
- MHW6000XG
And 18 more. Use the model lookup to check yours.
F6E2: Console not receiving from control
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F6E2
- Documented meaning
- Console not receiving from control
- Applies to
- 27 Maytag models on 4 platforms
- Can you keep using it?
- With caution
F6E2 means the console (user interface) is not receiving data from the main control.
What the washer is detecting
The console and the main control exchange data continuously. When the console detects no messages from the control, F6E2 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A break or loose connection in the console harness.
- Documented A fault on the main control or the console board.
Safe checks you can make
- Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks continuity of the console harness.
- Runs the main control and console tests.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer main control board replacement | $300–$720 | Moderate |
| Washer user interface / keypad replacement | $250–$550 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. If the washer works normally after a power reset, keep using it; if the code returns, have it diagnosed.
Maytag models documented with this code
- MVWB755DW
- MVWB757JW
- MVWB765FC
- MVWB765FW
- MVWB766FW
- MVWB835DC
- MVWB835DW
- MVWB855DC
- MVWB855DW
- MVWB865FC
- MVWB865FW
- MVWB865GC
- MVWB865GW
- MVWB955FC
- MVWB955FS
- MVWB955FW
And 11 more. Use the model lookup to check yours.
F6E2: Main control not receiving from motor control
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F6E2
- Documented meaning
- Main control not receiving from motor control
- Applies to
- 13 Maytag models on 1 platform
- Can you keep using it?
- With caution
F6E2 means the main control is not receiving data from the motor control unit.
What the washer is detecting
On these models the motor is run by a separate motor control unit that reports to the main control. When that communication is missing, F6E2 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A fault in the main control, its link to the motor control, or the motor control itself.
Safe checks you can make
- Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- Runs the main control test in service diagnostics.
- Checks the link between the main control and the motor control.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer motor control board replacement | $280–$600 | Moderate |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The washer may not agitate or spin. If a power reset does not clear it, have the drive system tested by a professional.
Maytag models documented with this code
F6E2: Main control cannot hear motor control
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F6E2
- Documented meaning
- Main control cannot hear motor control
- Applies to
- 3 Maytag models on 1 platform
- Can you keep using it?
- With caution
F6E2 on this platform means the main control is not receiving messages from the motor control.
What the washer is detecting
The main control and the motor control exchange messages during every cycle. When those messages stop, the control reports F6E2.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose or damaged connection between the main control and the motor control.
- Documented A power supply problem on the control.
- Possible A motor control fault.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- Checks the connections between the controls.
- Checks the control's power supplies; this requires professional testing because line voltage is present.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer motor control board replacement | $280–$600 | Moderate |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The drum may not turn. Have it diagnosed if the code repeats.
Maytag models documented with this code
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F6E2 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F6E2 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.