Maytag washer F3E5 error code
F3E5 does not mean the same thing on every Maytag washer. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Maytag models |
|---|---|---|
| Bulk detergent system error | Top-load washer | 22 |
| Dry temperature sensor fault | Front-load washer | 8 |
F3E5: Bulk detergent system error
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F3E5
- Documented meaning
- Bulk detergent system error
- Applies to
- 22 Maytag models on 3 platforms
- Can you keep using it?
- Generally yes
F3E5 means the level sensor in the bulk detergent reservoir is giving a reading outside its valid range.
What the washer is detecting
Models with an automatic detergent reservoir monitor how much detergent remains. When that level signal is out of range, F3E5 is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented An empty or improperly filled detergent drawer.
- Documented A fault in the reservoir level sensing that the dispenser test checks.
Safe checks you can make
- Open the detergent drawer, make sure it has detergent and is pushed fully closed.
- Use only the detergent type the owner's manual allows in the bulk reservoir.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Runs the automatic detergent dispenser test in service diagnostics.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer detergent dispenser repair | $180–$350 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Generally safe to keep using. Usually safe to keep washing; dispensing may not work until the reservoir issue is fixed.
Maytag models documented with this code
- MTW6200RF
- MTW6200RR
- MTW6200RW
- MTW6205RF
- MTW6205RR
- MTW6205RW
- MTW7200RF
- MTW7200RR
- MTW7200RW
- MTW7205RF
- MTW7205RR
- MTW7205RW
- MTW7405RR
- MVW6230HC
- MVW6230HW
- MVW6230RHW
And 6 more. Use the model lookup to check yours.
F3E5: Dry temperature sensor fault
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F3E5
- Documented meaning
- Dry temperature sensor fault
- Applies to
- 8 Maytag models on 1 platform
- Can you keep using it?
- Generally yes
F3E5 means the temperature sensor used by the drying or air-flow feature reads open, shorted or out of range.
What the washer is detecting
Models with a drying or air-flow function use a separate temperature sensor for it. When that reading is invalid, the control blocks the drying function but still lets the washer wash.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A failed dry temperature sensor (thermistor).
- Possible A loose or damaged connection to the sensor.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks the dry temperature sensor and its wiring.
- Reads the sensor value in service diagnostics.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer water temperature sensor replacement | $180–$310 | Light |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Generally safe to keep using. Wash cycles keep working; only the drying or air-flow function is disabled until the sensor is repaired.
Maytag models documented with this code
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F3E5 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F3E5 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.