Maytag washer F9E2-5: drain pump disconnected
F9E2-5 means the main control detected no electrical connection to the drain pump.
What F9E2-5 means
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F9E2-5
- Documented meaning
- Drain pump disconnected
- Applies to
- 13 Maytag models on 1 platform
- Can you keep using it?
- No — stop and have it checked
What the washer is detecting
The control checks that the drain pump circuit is connected. An open circuit, from a loose plug or broken wire, sets this sub-code.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose connector or broken wire at the drain pump.
- Documented A drain pump problem, checked with the pump test.
Safe checks you can make
- Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.
Further diagnosis requires opening the appliance. Beyond the owner checks, diagnosis involves removing panels, testing components and checking wiring. We describe what a technician investigates, not how to do it yourself.
What a technician checks
- Checks the wiring and connectors at the drain pump.
- Runs the drain pump test.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer drain pump replacement | $180–$420 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Stop using it until it is checked. The washer cannot drain. Stop using it; bail out standing water if needed and have the pump circuit checked.
Maytag models documented with this code
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F9E2-5 repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F9E2-5 diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.