Maytag washer F7EA error code
F7EA does not mean the same thing on every Maytag washer. Our data shows 2 documented meanings, depending on which engineering platform the model is built on. Look up your model number to see the one that applies.
| Meaning | Appliance | Maytag models |
|---|---|---|
| Motor phase lost | Top-load washer | 22 |
| Motor lost phase | Front-load washer | 11 |
F7EA: Motor phase lost
- Brand
- Maytag
- Appliance
- Top-load washer
- Code
- F7EA
- Documented meaning
- Motor phase lost
- Applies to
- 22 Maytag models on 3 platforms
- Can you keep using it?
- No — stop and have it checked
F7EA means one or more of the motor's three power phases was lost or carried less current than expected.
What the washer is detecting
These motors are driven on three separate phases. When the control sees one phase missing or below its current threshold, F7EA is stored.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A break or poor connection in the harness between the main control and the motor.
- Documented A motor winding fault or a main control drive fault, checked with the control and drive tests.
Safe checks you can make
- Unplug the washer for one minute, plug it back in and start a new cycle. If the code comes straight back, the condition is persistent and needs diagnosis.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- Runs the main control and drive-system tests.
- Checks harness continuity between the control and the motor.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer drive motor replacement | $300–$720 | Heavy |
| Washer main control board replacement | $300–$720 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Stop using it until it is checked. Stop using the washer if the code returns. Drive circuits carry high voltage and this requires professional testing.
Maytag models documented with this code
- MTW6200RF
- MTW6200RR
- MTW6200RW
- MTW6205RF
- MTW6205RR
- MTW6205RW
- MTW7200RF
- MTW7200RR
- MTW7200RW
- MTW7205RF
- MTW7205RR
- MTW7205RW
- MTW7405RR
- MVW6230HC
- MVW6230HW
- MVW6230RHW
And 6 more. Use the model lookup to check yours.
F7EA: Motor lost phase
- Brand
- Maytag
- Appliance
- Front-load washer
- Code
- F7EA
- Documented meaning
- Motor lost phase
- Applies to
- 11 Maytag models on 2 platforms
- Can you keep using it?
- With caution
F7EA means the motor control detected that one of the motor's power phases is missing.
What the washer is detecting
The variable-speed motor is driven through several windings. When the control sees one phase not carrying current, it stops the motor with F7EA.
Causes listed for this condition
In the order the service documentation checks them. Documented causes come from the manufacturer's service documentation for these platforms; possible causes are based on how the system works; unconfirmed marks common assumptions that the documentation does not support.
- Documented A loose or damaged connection between the control and the motor.
- Documented A power supply problem on the control.
- Possible An open motor winding.
Safe checks you can make
- Unplug the washer (or switch off its breaker) for one minute, then restore power and start a new cycle to see whether the code comes back. A code that returns right away points to a fault that needs diagnosis.
This stage requires professional testing. Full diagnosis involves hazards such as live line voltage, gas, a sealed refrigerant system or microwave high voltage. Do not attempt it yourself.
What a technician checks
- Checks the motor harness and connections.
- Runs the motor circuit test; supply checks require professional testing because line voltage is present.
Typical repairs and cost
Depending on what diagnosis finds, this code can lead to one of these repairs:
| Repair | Typical range | Labor |
|---|---|---|
| Washer drive motor replacement | $300–$720 | Heavy |
| Washer motor control board replacement | $280–$600 | Moderate |
Typical total ranges for the Las Vegas area, parts and labor included. The final cost depends on diagnosis, the exact model, parts availability and whether other damage is found.
Can you keep using it?
Use with caution. The drum may not turn. Have it diagnosed if the code returns.
Maytag models documented with this code
Related problems and codes
Other codes documented on the same Maytag platforms:
Repair or replace?
A fault code alone rarely justifies replacing a washer. Most F7EA repairs involve a single component once diagnosed. Replacement becomes worth considering when the unit is near the end of its typical 10–13-year life and the diagnosed repair is a major one. See the repair-or-replace guide.
Need F7EA diagnosed in the Las Vegas area?
We repair Whirlpool, Maytag, KitchenAid, JennAir, Amana and other Whirlpool-family appliances in Las Vegas, Henderson, Summerlin and Boulder City. A model number helps but is never required to book.